User`s manual

Which batteries and which procedure?
Use four new, longlife 1.5V AA batteries. Do not use batteries beyond their expiration date. If the
monitor is not going to be used for a prolonged period the batteries should be removed.
Using rechargeable batteries
You can also operate this instrument using rechargeable batteries.
Only use "NiMH" reusable batteries! •
If the battery symbol ( ) appears, the batteries must be removed and recharged! They•
must not remain inside the instrument, as they may become damaged through total dis-
charge even when switched off. The batteries must NOT be discharged in the blood pres-
sure monitor! If you do not intend to use the instrument for a week or more, always remove
the rechargeable batteries!
Recharge these batteries using an external charger and follow manufacturer’s instructions•
carefully.
5.11. Using the AC Adapter
You may also operate this monitor using the AC adapter (output 6V DC/600 mA with DIN plug).
Use only the approved ADC® AC adapter to avoid damaging the unit.
a) Ensure that the AC adapter and cable are not damaged.
b) Plug the adapter cable into the AC adapter port on the
right side of the blood pressure monitor.
c) Plug the adapter into your electrical outlet.
When the AC adapter is connected, no battery current is con-
sumed.
Note: No power is taken from the batteries while the AC
adapter is connected to the monitor. If electrical power is inter-
rupted, (e.g., by accidental removal of the AC adapter from the outlet) the monitor must be reset
by removing the plug from the socket and reinserting the AC adapter connection. If you have any
questions regarding the AC adapter please call 1-800-232-2670.
6. Software Functions (6022, 6023 only)
This unit can be used in connection with your personal computer (PC) running the ADC® Ad-
vanced PC Link Software. Your PC will allow a capacity of monitoring 80 patients, each with 1000
records of data (Note: Overuse will lower system efficiency).The memory data can be transferred
to the PC by connecting the monitor via the included USB cable with your PC. Note: The software
does not work with Mac computers.
6.1. Installation and Data Transmission
a) Insert CD into CD ROM drive of your PC. The installation will start automatically. If not, click on
SETUP.EXE.
b) Connect the monitor via USB cable with the PC. Three horizontal bars will appear on the dis-
play and last for 3 seconds.
c) The bars will then flash to indicate that the connection between computer and device is suc-
cessfully made. As long as the cable is plugged, the bars will keep flashing and the buttons are dis-
abled. During the connection, the device is completely controlled by the computer. Refer to the ‘Help’
file in the software for detailed instructions.