Installation manual

SECTION X

MANUAL RESET HI-LIMIT INSTRUCTIONS

IMPOR TANT

MANUAL RESET HI-LIMIT INSTRUCTIONS

FOR NON-MICROPROCESSOR OR PHASE 5 WITHOUT HEAT FAULT

This dryer was manufactured with a burner manual reset hi-limit thermostat (gas models only) and a basket

(tumbler)/lint chamber manual reset hi-limit thermostat. If either burner manual reset hi-limit thermostat is open

prior to the start of the drying cycle, or during the cycle, the dryer

will not recognize the open state of the burner

hi-limit thermostat and will start or continue through the drying cycle with no heat. Manual reset hi-limit thermostat

must be reset manually.

This hi-temperature condition may be caused due to a restricted exhaust, poor airflow, or improper burner

oven operation.

IMPORTANT

This dryer is equipped with a burner hi-

limit and tumbler/lint chamber hi-limit

thermostat which must be reset manually.

WARNING: Discontinue power to dryer

before attempting to reset hi-limit.

ADC P/N: 114093