Service manual

12
D. Control Box (Non-Computer Control)
The non-computer control box is made up of, a 30
position terminal block, fuses, and a 24vac transformer,
depending which model, the transformer may be
mounted in a different place. The fuses are to protect
certain circuits throughout the machine. The 30
position terminal block is used to combine the various
common wires throughout the machine for simplicity
and ease of service.
F. Main Door Switch
The main door switch is located behind the main door
on the right hand side. When the main door is opened,
the switch will also open preventing the dryer from
operating. The main door switch is a safety device and
should never be disabled.
E. Coin Box and Vault
The coin box and vault are located in the control box.
When a coin passes the coin sensor, it drops into the
coin vault. Lifting the control doors reveals the coin
box. To remove the coin box turn the key and pull out.