Clothes Dryer User Manual

D. DOOR SWITCH (HINGE BLOCK)

The main door switch is located behind the main door on the right hand

side. When the main door is opened, the switch will also open, preventing

the dryer from operating. The main door switch is a safety device and

should never be disabled.

G. BASKET (TUMBLER) AND DRIVE MOTOR ASSEMBLY ARRANGEMENT

The basket (tumbler) and the drive motor arrangement

are located (viewing from the front of the dryer)

approximately at the rear right side of the dryer. The

arrangement consists of an idler pulley, drive motor,

and basket (tumbler), which serve to adjust, drive,

and support the basket (tumbler). The idler assembly

has various nuts and bolts that are made to adjust the

belt tension.

F. BASKET (TUMBLER)

The basket (tumbler) consists of three (3) ribs and a perforated basket

(tumbler) along with a front and back, which are riveted together as an

assembly. The basket (tumbler) also consists of pop rivets, which attach

the basket (tumbler) to the drive system in the rear. The felt collar

helps to keep lint from accumulating behind the basket (tumbler).

E. MICROPROCESSOR ASSEMBLY

The microprocessor board is the latest Phase 5 controls.

It monitors the dryer functions ALL the time. Indicator

light emitting diode (L.E.D.) is mounted on the board to

help with servicing of the dryer.