Clothes Dryer User Manual

C. BURNER CONTROLS (GAS)

The illustration below shows you the gas valve assembly and the gas chamber.

TO REPLACE MAIN BURNER ORIFICE

1. Discontinue power to the dryer.

2. Remove back guard.

3. Remove screws securing gas valve bracket to the burner box, and remove the two (2) screws securing

pipe bracket.

4. Move the manifold assembly to the left and hold.

5. Unscrew main burner orifice and replace.

NOTE: Use extreme care when removing and replacing orifice. The orifice is made of brass and can

be easily damaged.

6. Reverse the removal procedure for reinstalling.

WARNING: Test ALL connections for leaks by brushing on a soapy water solution.

WARNING: NEVER TEST FOR LEAKS WITH A FLAME!!!