Clothes Dryer User Manual

26
TO REPLACE FRONT PANEL
1. Discontinue power to the dryer.
2. Remove the computer panels.
3. Remove the kick trim plate.
4. Remove lint screen drawers from the dryer.
5. Remove the screws securing the front panel to the dryer.
6. Disconnect the 4-pin door switch harness connector from the lint drawer switch box, top and bottom.
7. Remove the front panel assembly from the dryer.
8. Reverse this procedure for installing the new front panel.
TO REPLACE THE NYLON CATCH
1. Open the main door.
2. Drill out the two (2) pop rivets holding nylon catch to front panel using #21 (0.1590) drill bit.
3. Using two (2) pop rivets (PN: 154215) install nylon catch (PN: 170330) to the front panel. (Friction Door
Latch Kit [PN: 881987]).