Clothes Dryer User Manual

28
BASKET (TUMBLER) REMOVAL
1. Disconnect power to the dryer.
2. Remove the control panels and kick trim plate.
3. Remove the front panel, and disconnect the door switches.
4. Now remove the motor separator panel if removing the top basket (tumbler).
5. Loosen the two (2) nuts on the idler tension arm.
6. Move to the rear of the dryer. Remove the retaining basket (tumbler) shoulder bolt that secures the rear
teflon pad to the basket (tumbler).
7. Now return to the front of the dryer and pull the basket (tumbler) outwards.
8. To install a new basket (tumbler), reverse the removal instructions.
BASKET (TUMBLER) WHEEL REMOVAL
1. Disconnect power to the dryer.
2. Follow Step #2 through Step #7 in Basket (tumbler) Removal above.
3. Loosen and remove the 9/16” nut and pull the wheel out.
4. Reverse Step #3 to reinstall the wheel.
5. To reassemble, reverse the previous procedures.