Clothes Dryer User Manual

1) To effectively use this information or the flowcharts (on

page 37, page 38, and page 39), each

step must be completed in sequence, performing whatever tests are suggested. After the completion

of each test, the guide will direct the service technician to the next logical step in the troubleshooting

sequence based on the outcome of the previous check.

2) Components should be replaced only after each step has been completed and replacement is

suggested in the flowchart. However, the experienced technician realizes that a loose connection

or broken or shorted wire may be at fault where electrical components are concerned, and not

necessarily the suspected component itself.

c. Three (3) Visual Checks...

1) No spark and system

does not work. If not, proceed to First Visual Check on page 37.

2) Spark present but main burner

does not come on. If not, proceed to Second Visual Check on

page 38.

3) Main burner lights but

does not stay on. If not, proceed to Third Visual Check on page 39.