User manual

10. Disposal

The thermometer contains no hazardous materials. Discard in accordance

with national or local regulations. Remove the batteries before disposal.

Battery:

Dispose of empty batteries in accordance with national or local

regulations.

9. Calibration Testing

This thermometer is calibrated at the time of manufacture. If the thermometer

is operated in accordance with these instructions, periodic readjustment is not

required. ADC recommends checking calibration on an annual basis or when-

ever clinical accuracy of the thermometer is in question.

Recommendations for calibration do not supersede any legal obligations that

you may have in relation to this equipment. Please consult applicable local or

ational laws in the place of use to ensure that the requirements for the con-

trol of the measurement, functionality, and accuracy of the device are main-

tained for your specific uses.

Note that ADC is not responsible for validating the cleaning or disinfection

protocols used on this device outside of ADC’s manufacturing site. You

should determine the requirements for personnel, equipment, and materials

ecessary to achieve your desired disinfection levels and may need to employ

routine monitoring of your disinfection protocols within your facility. After

cleaning or disinfecting, wait at least 10 minutes prior to taking another meas-

urement.