Instruction manual

ManualsBrandsADC ManualsNetwork CardHRM-238 L1

Relays and Timers – Selection Guide

Relays and Timers –

Reliable Global Solutions

Selection Guide

www.rockwellautomation.com

Corporate Headquarters

Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201

Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions

Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444

Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640

Asia Pacific: Rockwell Automation, 27/F Citicorp Centre, 18 Whitfield Road, Causeway Bay, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846

Headquarters for Dodge and Reliance Electric Products

Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433

Europe/Middle East/Africa: Rockwell Automation, Brühlstraße 22, D-74834 Elztal-Dallau, Germany, Tel: (49) 6261 9410, Fax: (49) 6261 17741

Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 6356-9077, Fax: (65) 6356-9011

Supercedes 700-SG003A-EN-P — May, 2001

Relays and Timers –

Global Products You Can Trust

Terminal Block Relay

Product Profile

Pub. No. 700-PP012B-EN-P

Three ways to get more information:

• View publications online at: www.ab.com/manuals/rt

• Order publications online at:

www.the automationbookstore.com

• Contact your local Allen-Bradley distributor

Get It Now!

Interposing Relays

Product Profile

Pub. No. 700-PP014A-EN-P

General Purpose Timers

Product Profile

Pub. No. 700-PP011A-EN-P

Gold Plated Contacts

Product Profile

Pub. No. 700-PP015A-EN-P

Solid State Relays

Product Profile

Pub. No.

700SSR-PP001A-EN-P

General Purpose Relays

Product Profile

Pub. No. 700-PP010A-EN-P

Summary of content (244 pages)

PAGE 1
Relays and Timers – Global Products You Can Trust Terminal Block Relay Product Profile Pub. No. 700-PP012B-EN-P General Purpose Relays Product Profile Pub. No. 700-PP010A-EN-P Gold Plated Contacts Product Profile Pub. No. 700-PP015A-EN-P Interposing Relays Product Profile Pub. No. 700-PP014A-EN-P Get It Now! Solid State Relays Product Profile Pub. No. 700SSR-PP001A-EN-P Three ways to get more information: Relays and Timers – Selection Guide General Purpose Timers Product Profile Pub. No.
PAGE 2
Solid State Relays Interposing Relays The New Solid State Applications Solution New Cost-Saving Relay Design Rockwell Automation has broadened its Allen-Bradley relay Rockwell Automation is introducing a new and improved Allen- product line to include six new solid-state relays (SSRs). The Bradley 700-HC “Ice Cube” General Purpose Relay.
PAGE 3
Relays and Timers 1 Table of Contents General Information • • • • • Quick Selection Table Contact Switching Data Surge Suppression Solutions Low Energy Selection Criteria Catalog Number Index Page Page Page Page Page 6 17 21 25 30 Page Page Page Page Page 31 37 42 47 51 Solid-State Relays • • • • • Bulletin 700-SA Tube Base Relay Bulletin 700-SC "Ice Cube" Relay Bulletin 700-SE Flat Pack Relay Bulletin 700-SF Square Base Relay Bulletin 700-SH "Hockey Puck" Relay • Bulletin 700-SK "Slim Line" Relay
PAGE 4
Relays and Timers Table of Contents, Continued Latching Relay • Bulletin 700-HJ Magnetic Latching Relay Page 94 Power Relays • Bulletin 700-HG Power Relay • Bulletin700-HHF Flange Mount Power Relay Page 111 Page 114 DIN Rail Mounted Timing Relays • • Bulletin 700-FE Economy Timing Relay Bulletin 700-FS High Performance Timing Relay Page 116 Page 120 Socket Mounted Timing Relays • Bulletin 700-HNC Miniature Timing Relay • Bulletin 700-HNK Ultra-Slim Timing Relay • Bulletin 700-HR Dial Timing Relay •
PAGE 5
Relays and Timers Table of Contents, Continued Industrial Relays • Bulletin 700-CF Control Relay • Bulletin 700-M Miniature Control Relay • Bulletin 700-P Heavy-Duty Relay Page 186 Page 205 Page 211 Industrial Safety Control Relays • Bulletin 700S-CF Safety Control Relay • Bulletin 700S-P Heavy-Duty Safety Control Relay • Bulletin 700-ZP Self-Monitoring Relay Assembly Page 197 Page 202 Page 226 Industrial Timing Relays • Bulletin 700-PS Solid-State Timing Relay • Bulletin 700-RTC Solid-State Timing Rel
PAGE 6
General Information Quick Selection Table for Solid-State Relays Bulletin No. 700-SH 700-SE 700-SC Type Hockey Puck Flat Pack Miniature, Ice Cube Socketed Features Panel/DIN Mount, High Current, Protective Cover, LED Status Option Panel/DIN Mount, Low Profile Compatible w/700-HN103 or 128 socket, LED Status & Zero-cross AC Switching Options Load Type AC (47…63 Hz) AC (47…63 Hz) AC (47…63 Hz) DC Load Voltage Range 24…240V AC, 200…480V AC ➊ 75…264V AC 75…264V AC 3…52.
PAGE 7
General Information Quick Selection Table For Solid-State Relays, Continued Bulletin No. 700-SF 700-SA 700-SK Type Square Base, Socketed Tube Base, Socketed Slim Line, Socketed Features Compatible w/700-HN116 socket, LED status, zero-cross AC switching Compatible w/700-HN100, 125,108, and 202 socket, LED status, zero-cross switching Compatible w/700-HN121 socket. Supports Input (sensor) module or Output (SSR) module Load Type Load Voltage Range AC (47…63 Hz) DC 75…264V AC Load Current Max.
PAGE 8
General Information Quick Selection Table For Relays Bulletin No.
PAGE 9
General Information Quick Selection Table For Relays 700-HC 700-HK 700-HL 700-HP Interposing/Isolation Relay Interposing/Isolation Relay Interposing/Isolation Relay Interposing/Isolation Relay Pin Style Terminals,Standard ON/ OFF Flag Indicator, Electrical Schematic on Face, Clear Cover for Visual Inspection, Optional Push-totest and Manual Override, Optional LED Optional Pilot Light, Built-in Retainer Clip, Low Switching Capacity Ideal for PLC Interfaces, Built-in Coil Surge Protection, Fully As
PAGE 10
General Information Quick Selection Table For Relays Bulletin No. 700-HG 700-HHF 700-HJ Type Power Relay Power Relay Magnetic Latching Relay Features Panel Mount with Screw Terminals, Optional Magnetic Blowouts for Switching DC Loads, Optional Snap Action Switch Flange Mounted, Optional LED Socket Mounted, Ideal for Lighting Applications Contact Form SPST-N.O.-DM, SPDT, DPST-N.O.
PAGE 11
General Information Quick Selection Table for Relays Bulletin No.
PAGE 12
General Information Quick Selection Table For Timing Relays Bulletin No. 700-FE 700-FS 700-HR52, -HRP, -HRS, -HRT, -HRV 700-HRM/-HRC 700-HRF Type DIN Rail Timer DIN Rail Timer Multifunction Timer ON-Delay Timer Twin Timer Features Only 17.5 mm wide, 6 A Contact Rating, Multifunction or Single Function 22.
PAGE 13
General Information Quick Selection Table For Timing Relays Bulletin No. 700-HRY 700-HRQ 700-HNC 700-HNK Type Star-Delta Timer True OFF-Delay timer Miniature Timer Ultra-Slim Timer Features A wide star-time range (up to 120 s) Star-delta transfer time range (up to 0.
PAGE 14
General Information Quick Selection Table For Timing Relays Bulletin No.
PAGE 15
General Information Quick Selection Table For Industrial Timing Relays Bulletin No. 100-FPT 700-PT Type Pneumatic Timing Module (for 700-CF relays) Pneumatic Time-Delay Timer Features Timing function works independent of the supply voltage. Relay contact operates instantaneously. Continuous adjustment range. Continuous carrying current of 10 A, Contacts of N.O. and N.C. Open Type Without Enclosure. Mounts on 700-P relay.
PAGE 16
General Information Quick Selection Table For Industrial Timing Relays Bulletin No. 100-ETA 196-MT3 700-RTC 700-PS Type Solid-state Timing Module (for 700-CF relays) Solid-state Timing Module (for 700-M relays) Solid-state Timing Relay Solid-State Timer Self-contained or external potentiometer. Continuous carrying current of 5 A AC or DC. Stand alone or mount on 700-P or 700-R. Features Changes all contacts on Bulletin 100-C contactors and Bulletin 700-CF control relays into timed contacts.
PAGE 17
Relays and Timers General Information Contact Data Tables Contact Arrangement Contact Style Contact Material NEMA Pilot Duty ➊ 700-CF Up to 8 form X or 8 form Y cross stamped Ag A600 P600 700-CFB Up to 8 form X or 8 form Y bifurcated gold AgCuAu — 700-MB Up to 8 form X or 8 form Y bifurcated AgCu A300 Q300 700-M Up to 8 form X or 8 form Y single “X”mark AgCu A600 Q600 700-CPR ➋ N.O. or N.C.
PAGE 18
Relays and Timers General Information, Continued Contact Data Tables, Continued AC and DC Switching Capability Relay Type Contact Arrangement Contact Style Contact Material NEMA Pilot Duty ➊ 700-FE 1 N.O.
PAGE 19
Relays and Timers General Information, Continued Contact Data Tables, Continued Relay Type Contact Arrangement Contact Style Contact Material 700-HLS Solid-State 1 N.O.
PAGE 20
Relays and Timers General Information, Continued Solid-State Relays Data Tables Solid-State Relay Type Equivalent EM Relay Contact Configuration 700-SA Form A 700-SC Form A 700-SE ➊ Form A 700-SF Form A 700-SH ➊ Form A 700-SKO Form A Load Voltage Maximum AC and DC Switching Capability Load Zero-Cross Switching 1 mA 10 mA 50 mA 100 mA 1 A 3A 5A 10 A 20 A 25 A Device AC Yes Triac DC N/A Transistor AC Yes Triac DC N/A Transistor Yes Triac AC AC Yes Triac DC N/A Transistor
PAGE 21
Relays and Timers General Information, Continued Surge Suppression Information Cat. No (s). See 700-CF Relay See 700-M Relay See 700-R Relay Suppression Technique For use with Max. Relay Contact Dropout Time Max.
PAGE 22
Relays and Timers General Information, Continued Surge Suppression Information, Continued Cat. No (s.) Suppression Technique For use with Max. Relay Contact Dropout Time for 4-pole 700-HSV1 No effect 700-HSV2 — MOV Max.
PAGE 23
Relays and Timers General Information, Continued General Purpose Relay Selection Criteria Do you know what type of relay fits your application? (industrial, safety, or general purpose) Yes No Does the application present a potential hazard to the user or machinery? Which does the application require: a hazardous environment, safety, industrial, or general purpose relay? No Yes Hazardous Environment Which issue is the hazard: a Machine Safety (Control Reliability) ➊ or Hazardous Environment ➋ issue?
PAGE 24
Relays and Timers General Information, Continued General Purpose Relay Selection Criteria, Continued Which type of relay does the application require? • • • • • Power relay ( > 15 A) Miniature relay or interposing/isolation relay Magnetic latching relay Classic Style Special contact with low-energy switching capability relay Magnetic Latching Power Bulletin 700-HJ relay see page 94 Does the application have any of the following characteristics? • • • • Classic Style Miniature or interposing/isolati
PAGE 25
Relays and Timers General Information, Continued Low-Energy General Purpose Relay Selection Criteria Does the application require contact switching capability below 5 mA? No Yes Does the application require a miniature or slim line relay? No Does the application require a 4PDT contact configuration or a miniature relay? Yes Bulletin 700-HAB (2PDT, 3PDT) relay (25 mA…3 A switching @ 6V) see page 64 Is the environment relatively free of airborne chemicals that could create a film on the contacts or re
PAGE 26
Relays and Timers General Information, Continued Industrial Relay Selection Criteria Does the application require any of the following? • • • Contact load above 10 A AC or 5 A DC Convertible or replaceable contact cartridges? Mixture of different contact types to match range of load characteristics No Yes Does the application require either of the following? • • Which contact load best fits the application? More than 8 contacts per relay Pneumatic timing attachments No Does the application require
PAGE 27
Relays and Timers General Information, Continued Low-Energy Industrial Relay Selection Criteria Does the application require any of the following? • • • • Contact switching capability below 5 mA Convertible or replaceable contact cartridges Sealed logic reed cartridge Combination of low-energy and higher energy loads No Yes Bulletin 700-P relay with 700CPR contact cartridge (1…500 mA switching @ 5V) see page 226 ➊ Does the application require any of the following? • • More than 8 contacts per relay
PAGE 28
Relays and Timers General Information, Continued Timing Relay Selection Criteria Single Function Timers Timers that have only 1 timing mode (e.g., ON-Delay or OFF-Delay). Multi-Function Timers Timers that have 4…8 timing modes that are selected by turning the mode selection switch. RESET ON-Delay or (Delay on Operate) When power is applied continuously (or when power and a start signal are applied), the timing cycle begins. The output contacts change state after the time delay is completed.
PAGE 29
Relays and Timers General Information, Continued Solid-State Relay Glossary Terms Meaning Basic insulation Insulation for basic protection from electric shock (IEC950 1.2.9.2) Supplemental insulation Independent insulation provided outside of basic insulation to protect from electric shock when the basic insulation breaks down (IEC950 1.2.9.3) Reinforced insulation A single-layer of insulation (IEC950 1.2.9.
PAGE 30
Relays and Timers Catalog Number Index Cat. No. Page 700-A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 100-ETA . . . . . . . . . . . . . . . . . . . . . . . . . 189 100-FA . . . . . . . . . . . . . . . . . . . . . . . . . . 188 100-FL . . . . . . . . . . . . . . . . . . . . . . . . . . 190 100-FS . . . . . . . . . . . . . . . . . . . . . . . . . . 190 100-FPT . . . . . . . . . . . . . . . . . . . . . . . . . 189 100-JE . . . . . . . . . . . . . . . . . . . . . . . . . . 191 100-SA . . . . .
PAGE 31
Bulletin 700-SA Solid-State Relays Overview/Product Selection Bulletin 700-SA Table Of Contents • • • • • Product Selection . . . . . . . Accessories . . . . . . . . . . . . Specifications . . . . . . . . . . Approximate Dimensions . . . . . . . . . . . . 5 A (Resistive) Max. Continuous Load Current 264V AC or 125V DC Max.
PAGE 32
Bulletin 700-SA Solid-State Relays Accessories Description Pkg. Quantity Cat. No. Factory-stocked Item Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction Order ten or multiples of ten 10 700-HN100 ✔ Specialty Socket 8-pin backwired socket with solder terminals Order ten or multiples of ten 10 700-HN108 ✔ Screw Terminal Tube Base Socket — Panel or DIN Rail Mounting; Open Style Construction Order must be for 10 sockets or multiples of 10.
PAGE 33
Bulletin 700-SA Solid-State Relays Accessories, Continued Description Multi-Function Multi-Range Time Module Pkg. Quantity Cat. No. 1 700-HT2 Factory-stocked Item Cat. No.
PAGE 34
Bulletin 700-SA Solid-State Relays Specifications Control/Input Ratings Cat. No. Control Voltage Levels Rated Control Voltage Operating Control Voltage Range Impedance 5…24V DC 4…30V DC 1.5 K Ω (+20% -10%) 700-SAZY5Z25 700-SANY3Z25 Pick-up Voltage Drop-out Voltage 4V DC max. 1V DC min. Load/Output Ratings Applicable Load Cat. No. Rated Load Voltage Continuous Load Current (Resistive) Load Voltage Range Max. Inrush Current ➊ Max. ➋ — — — Min. 700-SAZY5Z25 100…240V AC 75…264V AC 0.
PAGE 35
Bulletin 700-SA Solid-State Relays Specifications, Continued Terminal Arrangement (Bottom View) (–) Load Load Load power supply ( Input ) (+) Input voltage – Note: + The plus and minus symbols shown in parentheses are for DC loads. Basic Application Considerations High Density Mounting of Multiple SSRs If multiple SSRs are installed side by side be aware that the outer case wall of the SSR serves to dissipate heat. Install the relays so that they are adequately ventilated.
PAGE 36
Bulletin 700-SA Solid-State Relays Approximate Dimensions Note: All units in millimeters unless otherwise indicated. Dimensions are not intended to be used for manufacturing purposes. 700-SA ➊ 35 max. 35 max. ➊ Bulletin 700-SA is compatible with cat. nos. 700-HN100, -108, -125, and -202 (sockets). 36 52.5 max.
PAGE 37
Bulletin 700-SC Solid-State Relays Overview/Product Selection Bulletin 700-SC Table Of Contents • • • • • • Product Selection . . . . . . . Accessories . . . . . . . . . . . . Specifications . . . . . . . . . . Approximate Dimensions . . . . . . . . . . . . 3 A (resistive) Max. Continuous Load (Output) Current 264V AC, 48V DC or 125V DC Max.
PAGE 38
Bulletin 700-SC Solid-State Relays Accessories Description Pkg. Quantity Cat. No. Factory-stocked Item Screw Terminal Socket — Panel or DIN Rail Mounting; Guarded Terminal Construction Order must be in ten or multiples of ten 1 700-HN103 ✔ Screw Terminal Socket – Panel or DIN Rail Mounting. Guarded Terminal Construction 14-blade miniature socket for use with Bulletin 700-SC relays.
PAGE 39
Bulletin 700-SC Solid-State Relays Specifications Control/Input Ratings Control Voltage Levels Cat. No. Rated Control Voltage Operating Control Voltage Range Impedance 700-SCZY3Z25 5…24V DC 4…28V DC 15 mA max. ➊ 4V DC max. 1V DC min. 700-SCZY2A1 100/110V AC 75…125V AC 41 KΩ± 20% 75V AC max. 20V AC min. 700-SCZY2A2 200/220V AC 150…250V AC 72 KΩ ± 20% 150V AC max. 40V AC min. 700-SCTY3Z24 24V DC 19.2…28.8V DC 2 KΩ ± 20% 19.2V DC max. 4V DC max.
PAGE 40
Bulletin 700-SC Solid-State Relays Specifications, Continued Characteristics Standards UL508, CSA C 22.2, CE, VDE Ambient Humidity Operating: 45%…85% (no condensation) Weight Approx. 50 g Load Current Versus Ambient Temperature Characteristics 700-SC_ _2... Load current (A) Load current (A) 700-SC_ _3... Ambient temperature (°C) Ambient temperature (°C) Inrush Current Resistivity➊ Inrush current (A. Peak) 700-SCNY3 700-SCNN2... Inrush current (A. Peak) 700-SCNN3... 700-SCT...
PAGE 41
Bulletin 700-SC Solid-State Relays Approximate Dimensions Note: Bulletin 700-SC is compatible with the 700-HN103, 700-HN104, and 700-HN128 sockets. All units in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes. Terminal Arrangement/ Internal Connections (Bottom View) 28 max. 1 4 5 8(+) 9 Load Load (+) 12(–) (–) 21.5 max. 13 36.5 max. Input 14 – 42.5 max.
PAGE 42
Bulletin 700-SE Solid-State Relays Overview/Product Selection Bulletin 700-SE Table Of Contents • • • • • • Product Selection . . . . . . . . 42 Accessories . . . . . . . . . . . . . 43 Specifications . . . . . . . . . . . 44 Approximate Dimensions . . . . . . . . . . . . . 46 Input-toOutput Isolation Method 20 A (resistive) Max. Continuous Load (Output) Current with Heat Sink 264V AC Max.
PAGE 43
Bulletin 700-SE Solid-State Relays Accessories Description Heat Sink — Panel or DIN Rail Mount ➊ Pkg. Quantity Cat. No. Factory-stocked Item 1 700-S10 ✔ 1 700-S20 ✔ 10 199-DR1 ✔ Cat No. 700-S10 Heat Sink — Panel or DIN Rail Mount ➊ Cat No. 700-S20 DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. Cat No. 199-DR1 ➊ Refer to "Load Current Vs.
PAGE 44
Bulletin 700-SE Solid-State Relays Specifications Control/Input Ratings ➊ Cat. No. Rated Control Voltage Input Impedance Operating Control Voltage Range Control Voltage Levels With Zero Cross Function Without Zero Cross Function Pick-up Voltage 700-SE_ _ _Z05 5V DC 4…6V DC 250 Ω ± 20% 300 Ω ± 20% 4V DC max. 700-SE_ _ _Z12 12V DC 9.6…14.4V DC 600 Ω ± 20% 800 Ω ± 20% 9.6V DC max. 700-SE_ _ _Z24 24V DC 19.2…28.8V DC 1.6k Ω ± 20% Drop-out Voltage 1V DC min. 19.2V DC max.
PAGE 45
Bulletin 700-SE Solid-State Relays Specifications, Continued Load Current vs.
PAGE 46
Bulletin 700-SE Solid-State Relays Approximate Dimensions Mounting Considerations➊➋➌ Note: All units are in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes. 3.5 dia. hole Terminal Arrangement/ Internal Connections (Top View) 47.5 max. 37.5 max. 14.5 3+ 30±0.5 Input voltage Two #110 (t = 0.5) (Faston tab or equivalent)* 6.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.1 2.9 1 Input Input 4- Load 2 Load power supply 7.95 6 11.5 max.
PAGE 47
Bulletin 700-SF Solid-State Relays Overview/Product Selection Bulletin 700-SF Table Of Contents • • • • • • Product Selection . . . . . . . 47 Accessories . . . . . . . . . . . . 48 Specifications . . . . . . . . . . 49 Approximate Dimensions . . . . . . . . . . . . 50 3 A (resistive) Max. Continuous Load (Output) Current 264V AC or 52.8V DC Max.
PAGE 48
Bulletin 700-SF Solid-State Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Socket — Panel or DIN Rail Mounting 8-blade miniature socket for use with DPDT HF relays. Order must be for 10 sockets or multiples of 10. 10 700-HN116 ✔ DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10.
PAGE 49
Bulletin 700-SF Solid-State Relays Specifications Control/Input Ratings Cat. No. Rated Control Voltage 700-SFZY3Z25 700-SFTY3Z24 700-SFNY3Z25 Control Voltage Levels Operating Control Voltage Range Impedance 5…24V DC 4…28V DC 24V DC 19.2…28.8V DC 5…24V DC 4…28V DC Pick-up Voltage Drop-out Voltage 15 mA max. ➊ 4V DC max. 1V DC min. 2 kΩ ± 20% 19.2V DC max. 1V DC min. 1.5 kΩ + 20%/–10% ➋ 4V DC max. 1V DC min. Load/Output Ratings Applicable Load Cat. No.
PAGE 50
Bulletin 700-SF Solid-State Relays Specifications, Continued/Approximate Dimensions Note: These data are non-repetitive. Keep the inrush current to half the rated value if it occurs repetitively. Inrush current resistivity is the ability of an SSR to withstand a large surge current for a short period of time. Surges are considered non-repetitive (max. repeatability once every 2…5 seconds). Keep the inrush current to half the rated value if it occurs repetitively.
PAGE 51
Bulletin 700-SH Solid-State Relays Overview/Product Selection Bulletin 700-SH Table Of Contents • • • • • • Product Selection . . . . . . . Accessories . . . . . . . . . . . . Specifications . . . . . . . . . . Approximate Dimensions . . . . . . . . . . . . Basic Application Considerations . . . . . . . . . 40 A (resistive) Max. Continuous Load (Output) Current with Heat Sink 264V AC or 528V AC Max.
PAGE 52
Bulletin 700-SH Solid-State Relays Accessories Description Pkg. Qty Cat. No. Factory-Stocked Item Heat Sink— Panel or DIN Rail Mount ➊ 1 700-S10 ✔ Heat Sink— Panel or DIN Rail Mount ➊ 1 700-S20 ✔ Heat Sink— Panel or DIN Rail Mount ➊ 1 700-S30 ✔ DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. 10 199-DR1 ✔ Cat No. 700-S10 Cat No. 700-S20 Cat No. 700-S30 Cat No.
PAGE 53
Bulletin 700-SH Solid-State Relays Specifications Control/Input Ratings Cat. No. Rated Control Voltage Operating Control Voltage Range Impedance ➊ 5...24V DC 4...32V DC 15 mA max ➋ Control Voltage Levels Pick-up Voltage Drop-out Voltage 4V DC max. 1V DC min. 700-SH_ _G… 700-SH_ _ H… 100...120V AC 75...132V AC 36 kΩ +/-20% 75V AC max. ➌ 20V AC min. ➌ 200...240V AC 150…264V AC 72 kΩ +/-20% 150V AC max. ➌ 40V AC min. ➌ 5...24V DC 4…32V DC 5 mA max. ➋ 4V DC max. 1V DC min.
PAGE 54
Bulletin 700-SH Solid-State Relays Specifications, Continued Characteristics Cat. No. 700-SH05G, -SH10G, SH25G Load Switching Method/ Device 700-SH40G 700-SH10H, -SH25H, SH40H Triac Thyristor Pick-up Time 1/2 of load power source + 1 ms max. (DC input) 3/2 of load power source + 1 ms max. (AC input) Drop-out Time 1/2 of load power source + 1 ms max. (DC input) 3/2 of load power source + 1 ms max. (AC input) 1.6 V (RMS) max 1.8 V (RMS) max 5 mA max (at 100V AC) 10 mA max.
PAGE 55
Bulletin 700-SH Solid-State Relays Specifications, Continued Load Current vs. Ambient Temperature Characteristics➊➋ ➊ For the above 5 graphs, the line “with iron plate measuring 100 x 100 x 0.8” means the SSR is mounted directly to an iron plate of at least this size. ➋ All graphs assume conductive grease is being used. Refer to page 56 for details of using conductive grease.
PAGE 56
Bulletin 700-SH Solid-State Relays Approximate Dimensions Mounting Considerations➊➋➌➍➎ All units are in millimeters unless otherwise indicated. Dimensions are not intended for manufacturing purposes. Terminal Arrangement/ Internal Connections (Top View) Four, M4 x 8 4.5 dia. screws Mounting Holes Two, 4.3-dia. or M4 holes Load Load power supply 58 max. 47.5 44 Load 1 2 47.6±0.2 Operating indicator 4.5 25 43 max. Cat. No. 700-SH05… (-) 4 13.8 (+) 3 Input 25 max. 27 max. 4.5 dia.
PAGE 57
Bulletin 700-SH Solid-State Relays Basic Application Considerations Load Connection • • For an AC load, use a power supply rated at 50 or 60 Hz. The maximum operating frequency is 10 Hz. The Bulletin 700-SH has a built-in varistor for surge/inrush protection of AC loads. If additional suppression is required, connect an external varistor across the load device terminals. Select a varistor which meets the load voltage condition outlined in the table below.
PAGE 58
Bulletin 700-SK Solid-State Relays Overview/Product Selection Bulletin 700-SK Table Of Contents • • Product Selection . . . . . . . . 58 Accessories . . . . . . . . . . . . 58 Specifications . . . . . . . . . . . 60 Approximate Dimensions . . . . . . . . . . . . .
PAGE 59
Bulletin 700-SK Solid-State Relays Accessories Description Pcs./Pkg. Cat. No. Factory-stocked Item Screw Terminal Socket — Panel or DIN Rail Mounting Order must be in multiples of ten 10 700-HN121 ✔ DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package. Order must be for 10 rails or multiples of 10. 10 199-DR1 ✔ 10 700-N40 10 700-N41 Cat No. 700-HN121 Cat No. 199-DR1 Pre-printed identification tags — contains 10 sheets of pre-printed and blank tags.
PAGE 60
Bulletin 700-SK Solid-State Relays Specifications Input Sensor Module Input Sensor Ratings Rated Input Voltage Cat, No. Operating Voltage Range Input Current Pick-up Voltage Drop-out Voltage 700-SKICZ24 12…24V DC 6.6…32V DC 8 mA max. 6.6V DC max. 3.6V DC min. 700-SKICA18 100…240V AC 60…264V AC 15 mA max. 60V AC max. 20V AC min. Output Logic Ratings Cat. No. 700-SKICZ24 700-SKICA18 Logic Level Supply Voltage Logic Level Supply Current Draw 4…32V DC 0.
PAGE 61
Bulletin 700-SK Solid-State Relays Specifications, Continued Output Module, Continued Characteristics 700-SKOZ2Z25 Cat. No. Load Switching Method/Device 700-SKON2Z25 700-SKOC2Z25 700-SKOC1Z25 Triac Transistor Pick-up time 1/2 of load power source cycle + 1 ms max. 1 ms max. Drop-out time 1/2 of load power source cycle + 1 ms max. 2 ms max. 20 Hz 100 kHz Response frequency Output ON voltage drop 1.6 V max. Leakage current 2.5V max. 1.5 mA max. VDRM VCEO (V) 1 mA max. 600 (ref.
PAGE 62
Bulletin 700-SK Solid-State Relays Approximate Dimensions All units are in millimeters unless otherwise indicated. Dimensions are not to be used for manufacturing purposes. Note: The input module (700-SKI) and output module (700-SKO) are compatible with the 700-HN121 socket. 1 5.2 Terminal Arrangement/ Internal Connections (Bottom View) 3 0.5 29 max. 17.4 4.75 1 13 max. 28 max. 5 (+) 4 9.6 (–) 4.7 Input 0.5 4.75 4 10 4 Load 5 7.
PAGE 63
Bulletin 700-HA General Purpose Relays Overview/ Product Selection Bulletin 700-HA Table Of Contents • • • • • Product Selection . . . . . . . 63 Accessories . . . . . . . . . . . . 66 Specifications . . . . . . . . . . 69 Approximate Dimensions . . . . . . . . . . . .
PAGE 64
Bulletin 700-HA General Purpose Relays Product Selection, Continued Bulletin 700-HAB Tube Base Relay with PIN Terminals (Bifurcated Contacts) — Mechanical ON/OFF Indicator included ➊ Wiring Diagrams Description DPDT 2-Pole 2 Form C Bifurcated AgNi Contacts Contact Rating U.S.
PAGE 65
Bulletin 700-HA General Purpose Relays Product Selection, Continued Bulletin 700-HAX Tube Base Relay with PIN Terminals (Bifurcated Contacts with Gold Overlay) — Mechanical ON/OFF Indicator Included ➊ Description DPDT 2-Pole 2 Form C Bifurcated AgNi Contacts with Gold Overlay Sockets Wiring Diagrams Contact Rating U.S.
PAGE 66
Bulletin 700-HA General Purpose Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Tube Base Sockets – Panel or DIN Rail Mounting. Guarded Terminal Construction 8-pin for use with DPDT Bulletin 700-HA relays, -HX digital timing relays, -HT (ON-Delay) and -HRM, -HRC and -HV (Repeat Cycle) timing relays. Order must be for 10 sockets or multiples of 10.
PAGE 67
Bulletin 700-HA General Purpose Relays Accessories, Continued Description Cat. No. 700-HSV1 MOV Suppressor Module ➊ Voltage Range: 24V AC 24…30V DC Order must be for 20 modules or multiples of 20. MOV Suppressor Module ➊ Voltage Range: 220…240V AC 220…300V DC Order must be for 20 modules or multiples of 20. MOV Suppressor Module ➊ Voltage Range: 110…120V AC 110…150V DC Order must be for 20 modules or multiples of 20. Diode Surge Suppressor ➊ Voltage Range: 6…250V DC Pkg. Qty. Cat. No.
PAGE 68
Bulletin 700-HA General Purpose Relays Accessories, Continued Description Pkg. Qty. Cat. No. Factorystocked Item Retainer Clip for Cat. Nos. 700-HN100, -HN101, -HN200, -HN201, -HN202, and -HN203 Sockets with Bulletin 700-HA Relays ➊ Secures relay in socket. Order must be for 10 clips or multiples of 10. 10 700-HN157 ✔ Relay Identification Snap-in Markers ➌ Snap-in markers fit on top of Bulletin 700-HA relay covers. The following are blank cards.
PAGE 69
Bulletin 700-HA General Purpose Relays Specifications ❶ Cat. No. 700-HA… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) NEMA B300 HA = 10 A – 120V, 240V HAB/HAX = 6 A – 120V, 240V Rated Insulation Voltage (Ui) Inductive Contacts 120V AC 240V AC DC Min. Low Energy Permissible Load Permissible Coil Voltage Variation Coil Consumption ±10% AC Coils Inrush Sealed DC Coils Max. Allowable Leakage Max. Contact Resistance 250V IEC – 300V UL/CSA Break Make Hp 0.33 3A 1 1.
PAGE 70
Bulletin 700-HA General Purpose Relays Specifications, Continued ➊ 700-HA Relay Performance Graphs 105 0 0.5 1 1.5 2 2.5 3 Contact life vs AC1 load at 1,800 cycles/h. Contact life vs. AC1 load at 1,800 cycles/h Power Consumption Maximum Output Current Maximum Output Voltage Maximum Output Power Thumbwheel Scale Accuracy Temperature Altitude Enclosure Mounting with Socket Only Sockets Certifications 4 2 1 0.6 0.4 0.2 0.1 20 60 100 140 180 0.8 k 0.6 0.4 1 220 0.8 0.6 0.4 0.
PAGE 71
Bulletin 700-HA General Purpose Relays Specifications, Continued Timing Charts, Cat. Nos. 700-HT1 and 700-HT2 MultiFunction Time Module (t = Time Range 0.10 s…240 h) Cat. Nos. 700-HT1 and -HT2 Timing Modes, Time Description, Timing Charts, and DIP Switch Selections Terms: U- S+ B1 A1 U is Power Input (Steady Green LED) R is Relay Output S Control, +A1 Socket, B1 Timer t is the resulting Time Delay (Flashing Green LED) A2 1. Power On-Delay 5.
PAGE 72
Bulletin 700-HA General Purpose Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. (2.125) (1.30) (1.45) Bulletin 700-HA Relay 5.2 (13/64) 50 (63/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes Cat. No.
PAGE 73
Bulletin 700-HA General Purpose Relays Approximate Dimensions, Continued Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 24.6 (31/32) 40.1 (1-37/64) 20.8 (53/64) 22 30 (1-3/16) 12 24 14 5 26 (1-1/32) 2 1 8 24.9 (63/64) 7 4 6 3 54.9 (2-5/32) 65 (2-35/64) 7 51.1 2-1/64) 4.2 (5/32) 2 8 1 A2 A1 21 11 3 4 5 6 38 (1-1/2) 33.0 (1-19/64) #4–40 M3 14.7 (37/64) Cat. No. 700-HN125 ➊ Cat. No.
PAGE 74
Bulletin 700-HA General Purpose Relays Approximate Dimensions, Continued Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 24 22 12 14 6 5 4 3 30 (1-3/16) 26 (1-1/32) 9 5.6 (7/32) 8 7 5 3 26 (1-1/32) 4 5.6 (7/32) 75 (2-15/16) 7 4.2 (11/64) 30 (1-3/16) 34 32 24 22 14 12 7 8 1 75 (2-15/16) 2 10 10 4.
PAGE 75
Bulletin 700-HB General Purpose Relays Overview/Product Selection Bulletin 700-HB Table Of Contents • • • • • Product Selection . . . . . . . 75 Accessories . . . . . . . . . . . . 76 Specifications . . . . . . . . . . 78 Approximate Dimensions . . . . . . . . . . . .
PAGE 76
Bulletin 700-HB General Purpose Relays Accessories Pkg. Qty. Cat. No.
PAGE 77
Bulletin 700-HB General Purpose Relays Accessories, Continued Pkg. Qty. Cat. No. Factorystocked Item Relay Identification Snap-in Markers ➌ Snap-in markers fit on top of Bulletin 700-HA relay covers. The following are blank cards. Squares slip into molded slot on top of Bulletin 700-HA or 700HB relay cover. 100 1492-SM5X12 1492-SM6X9 1492-SM6X12 1492-SM8X9 1492-SM8X12 1492-MP-Blank ➋ Pre-printed identification tags – contains 10 sheets of pre-printed and blank tags.
PAGE 78
Bulletin 700-HB General Purpose Relays Specifications➊ Cat. No. 700-HB… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Contacts NEMA B300 15 A – 120V, 240V Inductive Make 120V AC 240V AC 60 A 30 A DC Resistive Min.
PAGE 79
Bulletin 700-HB General Purpose Relays Specifications, Continued Technical Data 5 5- 10 á 6106 20 Max. Switching Current (A) 5 5 55- á 1010 6 4 2 1 A 0.6 B 0.4 0.2 4 4 55- á1010 0.1 0 1 2 3 4 20 Load (kVA) 60 100 140 180 220 Voltage DC (V) Contact life vs AC1 load at 600 cycles/h. Breaking capacity for DC1 load at 600 cycles/h. Load applied to 1 contact. A = for N.O. types B= other types 1 0.8 Reduction Factor Cycles 10 0.6 0.4 1 0.8 0.6 (Highly Resistive) 0.4 COS ϕ 0.
PAGE 80
Bulletin 700-HB General Purpose Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. Bulletin 700-HB Relay (1.95) (1.58) (2.39) (1.20) (1.4) (1.01) 95.6 (3.76) (3.34) (3.61) (3.32) (.125) 35.5 (1.44) (1.63) (1.26) Cat. No. 700-HN153 Wire Size: 2 x 2.5 mm2 Single Wire – Up to #12 AWG Double Wire – 2 x 2.5 mm2 (#2–14 AWG… #2–20 AWG) (Either Solid or Stranded) Strip Length: 9 mm (3/8 in.
PAGE 81
Bulletin 700-HD General Purpose Relays Overview/Product Selection Bulletin 700-HD Table of Contents • • • • • Product Selection . . . . . . . 81 Accessories . . . . . . . . . . . . 82 Specifications . . . . . . . . . . 83 Approximate Dimensions . . . . . . . . . . . . 84 Flange Mounted/Panel Mounted 15 A Contact Rating DPDT, 3PDT Blade Style Quick Connect Terminals (0.187 x 0.020 in.) Solder Terminals Description DPDT 2-Pole 2 Form C AgCdO Contacts Contact Rating 15 A Wiring Diagrams U.S.
PAGE 82
Bulletin 700-HD General Purpose Relays Accessories Pkg. Qty. Cat. No. Factorystocked Item Relay Identification Snap-in Markers ➊ Snap-in markers fit on top of Bulletin 700-HA relay covers. The following are blank cards. Squares slip into molded slot on top of Bulletin 700-HD relay cover. 100 1492-SM5X12 1492-SM6X9 1492-SM6X12 1492-SM8X9 1492-SM8X12 1492-MP-Blank ➋ Pre-printed identification tags – contains 10 sheets of pre-printed and blank tags.
PAGE 83
Bulletin 700-HD General Purpose Relays Specifications ➊ Cat. No. 700-HD… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Contacts Inductive Make 120V AC 240V AC 60 A 30 A DC Permissible Coil Voltage Variation Coil Consumption ±10% AC Coils Inrush Sealed NEMA B300 15 A ➌ – 120V 15 A ➌ – 240V 250V IEC-300V UL/CSA Break 6A 3A 30V DC, 15 A 80…110% of Nominal Voltage at 50 Hz 80…110% of Nominal Voltage at 60 Hz 80…110% of Nominal Voltage at DC 50 Hz 3.
PAGE 84
Bulletin 700-HD General Purpose Relays Specifications, Continued 5 5- 10 á 6106 20 Max. Switching Current (A) Cycles 10 5 5 55- á 1010 6 4 2 1 A 0.6 B 0.4 0.2 4 4 55- á1010 0.1 0 1 2 3 4 20 Load (kVA) 60 100 140 180 220 Voltage DC (V) Contact life vs AC1 load at 600 cycles/h. Breaking capacity for DC1 load at 600 cycles/h. Load applied to 1 contact. A = for N.O. types B= other types 1 Reduction Factor 0.8 0.6 0.4 1 0.8 0.6 0.4 COS 0.
PAGE 85
Bulletin 700-HC Interposing/Isolation Relays Overview/Product Selection Bulletin 700-HC Table Of Contents • • • • • Product Selection . . . . . . . 85 Accessories . . . . . . . . . . . . 86 Specifications . . . . . . . . . . 87 Approximate Dimensions . . . . . . . . . . . .
PAGE 86
Bulletin 700-HC Interposing/Isolation Relays Accessories Pkg. Qty. Cat. No. Factorystocked Item 10 700-ADL1 ✔ 10 700-ADL2 ✔ 10 700-ADL3 ✔ 10 700-AV1R ✔ 10 700-AV3R ✔ 10 700-AR1 ✔ 10 700-AR2 ✔ 1 700-AT1 available Oct. 02’ 1 700-AT2 available Oct. 02’ Screw Terminal Socket – Panel or DIN Rail Mounting. Guarded Terminal Construction 14-blade miniature socket for use with Bulletin 700-HC relays. 1 700-HN103 ✔ Screw Terminal Socket – Panel or DIN Rail Mounting.
PAGE 87
Bulletin 700-HC Interposing/Isolation Relays Specifications ➊ 0 Cat. No. 700-HC… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) NEMA C300, R300 7 A and 10 A 250V IEC – 300V UL/CSA Inductive Contacts 120V AC 240V AC DC 700-HC_4 15 A 7.5 A Hp 1.5 A 0.75 A 24V DC, 7 A 1/8 1/3 15 A 7.5 A Hp 1.5 A 0.
PAGE 88
Bulletin 700-HC Interposing/Isolation Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. Bulletin 700-HC Relay (Four-Pole) Bulletin 700-HC Relay (Two-Pole) Cat. No. HN-104 Single Wire: 0.2 mm2.....2.5 mm2 ( #24 AWG.....14 AWG) Double Wire: 2 X 0.2 mm2.....2 X 2.5 mm2 (2 X 24 AWG.....2 X 14 AWG) Wire Type: solid or stranded, copper only Strip Length: 7 mm (9/32 in.), Torque: 0.5 Nm (4.4 lb.
PAGE 89
Bulletin 700-HF General Purpose Relays Overview/Product Selection Bulletin 700-HF Table Of Contents • • • • Product Selection . . . . . . . Accessories . . . . . . . . . . . . Specifications . . . . . . . . . . Approximate Dimensions . . . . . . . . . . . . 10 A Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator 89 90 91 92 Square Base with Quick Connect/Solder Style Terminations Description Wiring Diagrams Contact Rating U.S.
PAGE 90
Bulletin 700-HF General Purpose Relays Accessories Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Socket – Panel or DIN Rail Mounting 8-blade miniature socket for use with DPDT Bulletin 700-HF relays. Order must be for 10 sockets or multiples of 10. 10 700-HN116 ✔ Screw Terminal Socket – Panel or DIN Rail Mounting 11-blade socket for use with 3PDT Bulletin 700-HF relays.
PAGE 91
Bulletin 700-HF General Purpose Relays Specifications ➊ Cat. No. 700-HF… Electrical Ratings Pilot Duty Rating Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Contacts Inductive Make 120V AC 240V AC 30 A 15 A DC Permissible Coil Voltage Variation Coil Consumption ±10% AC Coils Inrush Sealed DC Coils Max.
PAGE 92
Bulletin 700-HF General Purpose Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 33.5 (1-21/64) 28.2 (1-7/64) 33.5 (1-21/64) 28.2 (1-7/64) 36.1 (1-27/64) 21.8 36.1 (55/64) (1-27/64) Bulletin 700-HF Relay (DPDT) 31.3 (1-15/64) Bulletin 700-HF (3PDT) 33.5 (1-21/64) 28.2 (1-7/64) 36.1 (1-27/64) 41.6 (1-41/64) Bulletin 700-HF (4PDT) 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.
PAGE 93
Bulletin 700-HF General Purpose Relays Approximate Dimensions, Continued Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 30 (1-3/16) 7.9 (5/16) 4 3 2 1 4.3 (11/64) 65.5 (2-37/64) 4.0 (5/32) 8 7 6 5 48 (1-57/64) 25.1 (63/64) 25.9 (1-1/64) Cat. No. 700-HN116 Wire Size: 2 x 2.5 mm2 Single Wire – Up to #12 AWG Double Wire – 2 x 2.
PAGE 94
Bulletin 700-HJ Latching Relays Overview/Product Selection Bulletin 700-HJ Table Of Contents • • • • • • Product Selection . . . . . . . 94 Accessories . . . . . . . . . . . . 95 Specifications . . . . . . . . . . 96 Approximate Dimensions . . . . . . . . . . . . 97 Magnetic Latching Relay 10 A Contact Rating SPDT DPDT Single Coil DPDT Dual Coil Blade Style Quick Connect Terminals Bulletin 700-HJ Magnetic Latching Relay with Blade 0.187 x 0.
PAGE 95
Bulletin 700-HJ Latching Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Socket – Panel or DIN Rail Mounting. Guarded Terminal Construction 11-blade socket for use with Bulletin 700-HB and -HJ relays and HS timing relays. 1 700-HN153 ✔ Screw Terminal Base Socket – Panel or DIN Rail Mounting. Open Style Construction 11-blade for use with Bulletin 700-HB and -HJ relays and -HS timing relays. Order must be for 10 sockets or multiples of 10.
PAGE 96
Bulletin 700-HJ Latching Relays Specifications ➊ Cat. No. 700-HJ… Electrical Ratings Pilot Duty Rating Rated Thermal Current (Ith) — 10 A 250V IEC, 300V UL/CSA Break Rated Insulation Voltage (Ui) Contacts Inductive Make 120V AC 240V AC 30 A 15 A DC Permissible Coil Voltage Variation Single AC Coil 1.44 VA 1.44 VA Coil Consumption ±10% Inrush AC Coils Sealed DC Coils 3A 1.
PAGE 97
Bulletin 700-HJ Latching Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 47.7 (1-7/8) 38.1 (1-1/2) 35.0 (1-3/8) Bulletin 700-HJ Relay 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes Cat. No.
PAGE 98
Bulletin 700-HK Interposing/Isolation Relays Overview/Product Selection Bulletin 700-HK "Slim Line" Relay Table Of Contents • • • • • • Product Selection . . . . . . . . 98 Accessories . . . . . . . . . . . . . 99 Specifications . . . . . . . . . . 100 Approximate Dimensions . . . . . . . . . . . .
PAGE 99
Bulletin 700-HK Interposing/Isolation Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Socket – Panel or DIN Rail Mounting 5-blade miniature socket for use with 1-pole, Bulletin 700-HK relays. This socket includes a retainer clip. Order must be for 10 sockets or multiples of 10. 10 700-HN121 ✔ Screw Terminal Socket – Panel or DIN Rail Mounting 8-blade miniature socket for use with 2-pole, Bulletin 700-HK relays. This socket includes a retainer clip.
PAGE 100
Bulletin 700-HK Interposing/Isolation Relays Specifications ➊ Cat. No. 700-HK… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) B300 1-Pole — 10 A Inductive Contacts 120V AC, 1-phase 240V AC, 1-phase Make, Break, & Continuous V DC Min.
PAGE 101
Bulletin 700-HK Interposing/Isolation Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 29 (1-9/64) 24 (1-7/64) 13 (1/2) Bulletin 700-HK Relay SPDT and DPDT Relays 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes Cat. No.
PAGE 102
Bulletin 700-HL Interposing/Isolation Relays Overview/Product Selection Bulletin 700-HL "Terminal Block Relay" Table Of Contents • Product Selection . . . . . . . 102 Accessories . . . . . . . . . . . . 103 Specifications . . . . . . . . . . 104 Approximate Dimensions . . . . . . . . . . . .
PAGE 103
Bulletin 700-HL Interposing/Isolation Relays Accessories Description Replacement Relays Order must be for 20 relays or multiples of 20. Pkg. Qty. 20 Socket Input Voltage Cat. No. 12V 24V 48V 110/125V 220…240V 120V…125V 700-TBR12 ➊ 700-TBR24 ➊ 700-TBR48 ➊ Factorystocked Item ✔ ✔ ✔ 700-TBR60 ➊ ✔ 700-TBS24 ✔ 700-TBS60 ✔ 240V Cat. No. 700-TBR24 Replacement SSR 4-blade miniature relay for use with 1 N.O. SSR output. Order must be for 18 relays or multiples of 18.
PAGE 104
Bulletin 700-HL Interposing/Isolation Relays Specifications ➊ Pilot Duty Rating Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Contacts Min.
PAGE 105
Bulletin 700-HL Interposing/Isolation Relays Specifications, Continued Cat. No. 700-HLS… (Solid State Output) Electrical Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Control Circuit Min. Control Voltage Maximum Control Voltage Control Current Release Voltage 2A 250V IEC, 300V UL/CSA 80% nominal voltage 110% nominal voltage 9 mA ±10% (24V) 4 mA ±10% (120/240V) 0.4 x nominal voltage (24V), 0.
PAGE 106
Bulletin 700-HL Interposing/Isolation Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 88.00 (3.46) 6.20 (0.24) 76.00 (2.99) Bulletin 700-HL Screw Terminal Design Bulletin 700-HL Spring Terminal Design 88.00 (3.46) 5.2 (13/64) 6.20 (0.24) 50 (63/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No.
PAGE 107
Bulletin 700-HP Interposing/Isolation Relays Overview/Product Selection Bulletin 700-HP (PCB) "Pin Style” Relay Table Of Contents • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . .
PAGE 108
Bulletin 700-HP Interposing/Isolation Relays Accessories Pkg. Qty. Cat. No. Factorystocked Item 10 700-ADL1R ✔ 10 700-ADL2R ✔ 10 700-ADL3R ✔ 10 700-AV1R ✔ 10 700-AV3R ✔ 10 700-AR1 ✔ 10 700-AR2 ✔ 1 700-AT1 available Oct. 02’ 1 700-AT2 available Oct. 02’ Screw Terminal Socket – Panel or DIN Rail Mounting 8-pin miniature socket for use with 2-pole, Bulletin 700-HP relays. Incorporates coil and contact separation. Order must be for 10 sockets or multiples of 10.
PAGE 109
Bulletin 700-HP Interposing/Isolation Relays Specifications ➊ Cat. No. 700-HP… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) C300, R300 2-Pole — 8A 250V IEC, 300V UL/CSA Inductive Contacts 120V AC, 1-phase 240V AC, 1-phase Make, Break, & Continuous V DC Min.
PAGE 110
Bulletin 700-HP Interposing/Isolation Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. Bulletin 700-HP Relay 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes Cat. No. 199-DR1 199-DR4 A B C D 35 (1-3/8) 35 (1-3/8) 27 (1-1/16) 27 (1-1/16) 7.
PAGE 111
Bulletin 700-HG Power Relays Overview/Product Selection Bulletin 700-HG "Power" Relay Table Of Contents • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . .
PAGE 112
Bulletin 700-HG Power Relays Product Selection, Continued/Accessories Auxiliary Snap Action Switch Contact SPDT (1 Form C) Material Silver Cad. Ox. Rating 10 A at 120 or 240 Resistive Dielectric Withstand V (1 Min.) 1500V AC RMS Contact to Frame Accessories 112 Description Pkg. Qty. Cat. No. Pre-printed identification tags – contains 10 sheets of pre-printed and blank tags. Each sheet contains 13 sets of the markings CR…9CR, TR…9TR, M…9M, F, R, 1S, and 117 blank tags.
PAGE 113
Bulletin 700-HG Power Relays Specifications ➊ Cat. No.
PAGE 114
Bulletin 700-HHF Power Relays Overview/Product Selection Bulletin 700-HHF Table Of Contents • • • • Product Selection . . . . . . . 114 Specifications . . . . . . . . . . 115 Approximate Dimensions . . . . . . . . . . . . 115 Flange-Mounted Blade Style Quick Connect Terminals Optional Pilot Light Solder Terminals Flange-Mounted Power Relay with Blade Style 0.250 x 0.
PAGE 115
Bulletin 700-HHF Power Relays Specifications ➊ SPST-NO-DM DPDT 3PDT Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Inductive Contacts 120V AC 240V AC SPST-NO-DM 60 A 30 A DC Permissible Coil Voltage Variation Coil Consumption ±10% Inrush AC Coils Sealed DC Coils 50 Hz 7.2 VA 4.8 VA Max. Allowable Leakage Dielectric Withstand Voltage Cat. No.
PAGE 116
Bulletin 700-FE DIN Rail Timing Relays Overview/Product Selection Bulletin 700-FE Table Of Contents • • • • • Product Selection . . . . . . . 117 Accessories . . . . . . . . . . . . 118 Specifications . . . . . . . . . . 118 Approximate Dimensions . . . . . . . . . . . . 119 Adjustable Function and Timing Range Timing Relays DIN Rail Mounted Without Cost of Socket 17.5 mm wide, Multi-Function or Single Function Available as 1 N.O. or SPDT Contact Output, 6A Timing Ranges From 0.05s…10.
PAGE 117
Bulletin 700-FE DIN Rail Timing Relays Product Selection, Continued Special Functions Functions Available Contact Output Time Ranges Supply Voltages Cat. No. Star-delta 2N.O. with 1 Common 0.15 s…10 min. ➊ (4 settings) 24V…48V AC/DC 24…240V AC 50/60 Hz 700-FEY2QU23 Factorystocked Item 700-FE Function and Connection Diagrams (A) On-Delay (B) Off-Delay or or LA1 +A3 LA1 +A3 or Output Output 1 N.O. (SPST) 1 N.O.
PAGE 118
Bulletin 700-FE DIN Rail Timing Relays Accessories Description Qty. Cat. No. Panel Mounting Adapter For surface mounting according to drilling plan EN 50 002 5 199-FSA Labeling sheet: 10 sheets with 105 self-adhesive paper labels each, 6 x 17 mm 10 100-FMS Factory-stocked Item Specifications ➊ Time Characteristics (according to VDE 0435, part 2021) SPDT 1 N.O.
PAGE 119
Bulletin 700-FE DIN Rail Timing Relays Specifications, Continued General Specifications SPDT 1 N.O. Insulation Characteristics EMC/Interference Immunity EMC/Emmission Safe Isolation Climatic Withstand Vibration Resistance Shock Resistance Protection Class IEC 947-1 Weight Certifications Ambient Temperature Connections Mounting Disposal 2 kV AC/50 Hz test voltage according to VDE 0435 and 4 kV 1.
PAGE 120
Bulletin 700-FS Timing Relays Overview/Product Selection Bulletin 700-FS Table Of Contents • • • • • Product Selection . . . . . . . 120 Accessories . . . . . . . . . . . . 122 Connection Diagrams . . . . 123 Specifications . . . . . . . . . . 126 Adjustable Function and Timing Range Timing Relays DIN Rail Mounted without Cost of Socket 22.5 mm Wide Multifunction or Single Functions Available as SPDT or DPDT Contact Output, 8 A Timing Ranges From 0.
PAGE 121
Bulletin 700-FS Timing Relays Product Selection, Continued Multi-Function (This device offers you the flexibility of selecting one of 8 single timing functions.) Functions Available Contact Outputs M Multi-function timing relays 8 Single-functions: A, B, C, D, E, F, I, and L ON and OFF function additional (for installation and maintenance) note: See next page for function description. Time Ranges (SPDT) 1 C/O (SPDT) 1 C/O 0.
PAGE 122
Bulletin 700-FS Timing Relays Accessories Qty. Cat. No.
PAGE 123
Bulletin 700-FS Timing Relays 700-FS Function and Connection Diagrams (A) On-Delay (B) Off-Delay (Min. Pulse AC 50 ms…DC 30 ms) ➊ 1c/o (SPST) Output 1c/o (SPST) Output ➊ 2 c/o (DPDT) Output 1 2 c/o (DPDT) Output 1 Output 2 Output 2 Output 2 ➋ ➋ Output 2 ➌ ➋ (C) On- and Off-Delay ➌ ➋ (D) One Shot ➊ Output Output ➌ ➌ (E) Fleeting Off-Delay (Min.
PAGE 124
Bulletin 700-FS Timing Relays Connection Diagrams, Continued Special Function Flasher (Repeat Cycle Starting with Pulse or Pause) Timing Relays Description t2 Setting Up Switch Down 1 Range Setting Separate Range Settings t1 Setting 700-FSH3U 700-FSH3V Supply Voltages (A1/A2) Z12 12V DC U23 24…48V DC, 24…240V AC, 50/60 Hz Function Diagram / Connection Diagram (H) Flasher (Repeat Cycle Starting with Pulse or Pause) The repeat cycle timer permits different settings for on and off times.
PAGE 125
Bulletin 700-FS Timing Relays Connection Diagrams, Continued Function Diagram/Connection Diagram (Q) Off-Delay without Supply Voltage (True Off-Delay) — When input power is turned on, the output contact changes state. When the power is removed, the time delay begins. The output contact returns to shelf state at the end of the time delay. Note: Min.
PAGE 126
Bulletin 700-FS Timing Relays Specifications ➊ Time Characteristics (according to VDE 0435, Part 2021) Setting Accuracy Repeatability Tolerance ±5% of full scale ±0.2% of the setting values Voltage: ±0.001%/%∆U Temperature: ±0.
PAGE 127
Bulletin 700-HNC Plug-in Timing Relays Overview/Product Selection Bulletin 700-HNC Table Of Contents • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . Miniature Timer, Perfect for Converting &00-HC "Ice Cube" Relays Into Timing Relay 4 Operating Modes 4PDT Contact Output Socket Mounted Timing Range From 0.
PAGE 128
Bulletin 700-HNC Plug-in Timing Relays Specifications ➊ Ratings Item Pilot Duty Rating Pin type Operating voltage range Reset voltage Power consumption Control outputs 120V AC Make 240V AC 120V AC Break 240V AC Hp at 120V AC Hp at 240V AC Accuracy of operating time Setting error Reset time Influence of voltage Influence of temperature Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Life expectancy 700-HNC NEMA B300 Plug-in 85%…110
PAGE 129
Bulletin 700-HNC Plug-in Timing Relays Specifications, Continued Noise immunity Static immunity Enclosure rating Weight EMC Standards Characteristics, Continued ±1.5 kV, square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise) Destruction:8 kV Malfunction:4 kV IP40 Approx.
PAGE 130
Bulletin 700-HNC Plug-in Timing Relays Timing Charts Note:t:Set time Rt:Reset time Operating Mode Timing Charts / Wiring Diagram ON-Delay Rt t t Power (13-14) Time limit contact NC (9-1, 10-2, 11-3, 12-4) Power t Time limit contact NO (9-5, 10-6, 11-7, 12-8) Output Run/Power indicator (PW) Output indicator (UP) One Shot Rt t t Power (13-14) Time limit contact NC (9-1, 10-2, 11-3, 12-4) Power t Time limit contact NO (9-5, 10-6, 11-7, 12-8) Output Run/Power indicator (PW) Output indicator
PAGE 131
Bulletin 700-HNC Plug-in Timing Relays DIP Switch Settings Time Ranges Cat. No. 700-HNC44AZ12 700-HNC44AZ24 700-HNC44AZ48 700-HNC44AZ11 700-HNC44AZ25 700-HNC44AA24 700-HNC44AA12 700-HNC44AA23 700-HNC44BZ12 700-HNC44BZ24 700-HNC44BZ48 700-HNC44BZ11 700-HNC44BZ25 700-HNC44BA24 700-HNC44BA12 700-HNC44BA23 Time Range Time Setting Range Setting Factory-Set 1s 0.1 s…1 s Yes 10 s 1 s…10 s No 1 min. 0.1 s…1 min. No 10 min. 1 min.…10 min. No 1 min. 0.1 min.…1 min. Yes 10 min. 1 min.…10 min.
PAGE 132
Bulletin 700-HNC Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches) where not specified. Approximate Dimensions are not intended to be used for manufacturing purposes. T imers 30.0 (1-3/16) Front Mounting 24.9 (57/64) 6.1 (15/64) Approximate Dimensions for cat. no. 700-HNC 8 7 6 5 4 3 2 1 21.1 (53/64) 4.2 (5/32) 62.0 (2-15/64) Fourteen, x 1.2 mm elliptic holes Fourteen, 3 1.23 elliptic holes 65.0 (2-9/16) 14 12 13 11 10 9 28 28 max.
PAGE 133
Bulletin 700-HNK Plug-in Timing Relays Overview/Product Selection Bulletin 700-HNK Table Of Contents • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . The Ultra-Slim Timing Relay is The Smallest Relay Available It is Perfect for Converting 700-HK Relays Into a Timing Relay SPDT and DPST-NO Contact Output Socket Mounted Timing Range From 0.
PAGE 134
Bulletin 700-HNK Plug-in Timing Relays Specifications ➊ Ratings Item Pilot Duty Rating Rated supply voltage Pin type Operating mode Operating voltage range Power consumption Control outputs 120V AC Make 240V AC 120V AC Break 240V AC Hp at 240V AC Accuracy of operating time Setting error Reset time Influence of voltage Influence of temperature Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Life expectancy Impulse withstand voltage No
PAGE 135
Bulletin 700-HNK Plug-in Timing Relays Timing Charts Note: t: Set time Rt: Reset time Timing Chart Operating Mode 700-HNK41… t ON-Delay Power t Output 700-HNK42… Rt Rt t t Power (1-5) Power (1-8) Time limit contact NC (4-2) Time limit contact NO 4-3, 5-6 Time limit contact NO (4-3) Run/Power indicator (PW) Run/Power Indicator (PW) Output indicator (OUT) t Output Indicator (OUT) Rt t Interval Power t Output t Rt t Power (1-5) Power (1-8) Time limit contact NC (4-2) Time limit con
PAGE 136
Bulletin 700-HNK Plug-in Timing Relays Pulse Operation A pulse output for a certain period can be obtained with a random external input signal. Use the 700-HNK in interval mode as shown in the following timing chart. Power (3-8) External short circuit (1-4) External input (1-3) Timer circuit 50 ms min.
PAGE 137
Bulletin 700-HNK Plug-in Timing Relays DIP Switch Settings Time Ranges Cat. No. 700-HNK41AZ12 700-HNK41AZ24 700-HNK41AA24 700-HNK42AZ12 700-HNK42AZ24 700-HNK42AA24 700-HNK41BZ12 700-HNK41BZ24 700-HNK41BA24 700-HNK42BZ12 700-HNK42BZ24 700-HNK42BA24 Time Range Time Setting Range Setting Factory-Set 1s 0.1 s…1 s Yes 10 s 1 s…10 s No 1 min. 0.1 s…1 min. No 10 min. 1 min…10 min. No 1 min. 0.1 min…1 min. Yes 10 min. 1 min…10 min. No 1h 0.
PAGE 138
Bulletin 700-HNK Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 47 (1.86) 46 (1.81) 12.8 (0.50) 47 (1.86) 46 (1.81) 12.8 (0.50) 6 (0.23) 28.8 31.2 (1.13) (1.22) 31.2 28.8 (1.22) (1.13) Bulletin 700-HNK41 SPDT Contact Approximate Dimensions Bulletin 700-HNK42 DPST-NO Contact Approximate Dimensions 30.5 ( 1-7/32) 30.5 ( 1-7/32) 7.11 (9/32) 11 4 +) 5(+ (A1)) 2.
PAGE 139
Bulletin 700-HR Plug-in Timing Relays Overview/Product Selection Bulletin 700-HR Table Of Contents • • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . Dial Timing Relays Socket or Panel Mounted 5 A Contact Ratings or Transistor Outputs Single Function or Multi-Function Timing Range From 0.
PAGE 140
Bulletin 700-HR Plug-in Timing Relays Product Selection, Continued Timing Mode Factorystocked Item Timing Range Sockets Pins Input Voltage Contact Outputs Cat. No. 0.05 s.…30 h 700-HN100 700-HN125 700-HN108 8 12V DC DPDT 700-HRF72DZ12 0.05 s.…30 h 700-HN100 700-HN125 700-HN108 8 24V AC/DC DPDT 700-HRF72DU25 0.05 s.…30 h 700-HN100 700-HN125 700-HN108 8 48…125V DC DPDT 700-HRF72DZ45 0.05 s.…30 h 700-HN100 700-HN125 700-HN108 8 100…240V AC DPDT 700-HRF72DA18 0.05 s.
PAGE 141
Bulletin 700-HR Plug-in Timing Relays Product Selection, Continued Timing Mode Timing Range Sockets 700-HN100 700-HN125 700-HN108 Pins Input Voltage Contact Outputs Cat. No. Factory-stocked Item 100…120V AC DPDT 700-HRQN2GA12 ✔ 200…240V AC DPDT 700-HRQN2GA22 100…120V AC DPDT 700-HRQR2GA12 ➊ 200…240V AC DPDT 700-HRQR2GA22 ➊ 100…120V AC DPDT 700-HRQN2HA12 200…240V AC DPDT 700-HRQN2HA22 100…120V AC DPDT 700-HRQR2HA12 ➊ 200…240V AC DPDT 700-HRQR2HA22 ➊ 8 0.
PAGE 142
Bulletin 700-HR Plug-in Timing Relays Timer General Functions 700-HR Multifunction Timer Power indicator (green) (Flashes when Timer operates; lit when Timer stops operating) Output indicator (orange) (Lit when energized) Operating mode display window Operating mode selector Select a mode from: A, B, B2, C, D, and E (700-HR, -HRV, and -HRT) UP Scale range display windows Time unit display window Time Range selector (select one from 1.2, 3, 12, and 30 at full scale; with the 700-HR select from 2.
PAGE 143
Bulletin 700-HR Plug-in Timing Relays Accessories Description Pkg. Qty. Cat. No. Factory-stocked Item Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Guarded Terminal Construction 8-pin for use with Bulletin 700-HR and 700-HX timing relays. Order must be for 10 sockets or multiples of 10. 10 700-HN100 ✔ Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Open Style Construction 8-pin for use with Bulletin 700-HRM, and -HRC timing relays.
PAGE 144
Bulletin 700-HR Plug-in Timing Relays Accessories, Continued Pkg. Qty. Cat. No. Factorystocked Item 1 700-HN130 ✔ 10 700-HN131 ✔ Protective Cover Helps prevent tampering of timing and mode settings. Provides a degree of protection against water and dirt from entering the front of the relay. For use with all Bulletin 700-HRs and -HX timing relays. 1 700-HN132 ✔ Pre-printed identification tags — contains 10 sheets of pre-printed and blank tags.
PAGE 145
Bulletin 700-HR Plug-in Timing Relays Specifications 700-HR, -HRS, HRV 700-HRP 700-HRC 700-HRM 700-HRF 700-HRY 700-HRQ 700-HRT (Transistor Outputs) Electrical Ratings Pilot Duty Rating NEMA B300 — Thermal Current (Ith) 5A 100 mA 30 A — 15 A — 3A — 1.5 A — 120V AC Make 240V AC 120V AC Break 240V AC Hp at 120V 1/6 Hp Hp at 240V 1/3 Hp 1/4 Hp 1/6 Hp 1/4 Hp 1/6 Hp — Accuracy of operating time ±0.2% FS max. (±0.2%±10 ms max. in a range of 1.
PAGE 146
Bulletin 700-HR Plug-in Timing Relays Timer Wiring Diagrams and Timing Charts Multifunction and ON-Delay Timer Application Examples A Mode: Signal ON-Delay ON-delay operation (A mode) is a basic mode. t1 1. Power-ON Start/Power-OFF Reset ➊ Power (2 and 10) The Power-ON start/Power-OFF reset operation is a standard operating method.
PAGE 147
Bulletin 700-HR Plug-in Timing Relays Bulletin 700-HR Timer Wiring Diagrams and Timing Charts, Continued 2. Signal-ON-OFF Start/Instantaneous Operation/Time-Limit ➊ Reset Multifunction and ON-Delay Timer, Continued t 2. Signal Start/Signal Reset (in B Mode) ➊ If there is an abnormal signal, flashing starts. When the abnormal condition is restored, a reset signal stops the display flashing.
PAGE 148
Bulletin 700-HR Plug-in Timing Relays Bulletin 700-HR Timer Wiring Diagrams and Timing Charts, Continued Multifunction and ON-Delay Timer, Continued t 2.
PAGE 149
Bulletin 700-HR Plug-in Timing Relays Bulletin 700-HR Timer Wiring Diagrams and Timing Charts, Continued 700-HRF Twin Timer, 700 -HRY Star-Delta Timer, and 700- HRQ Off-Delay Timer Star-Delta (700-HRY) B Mode: Repeat Cycle Off-start (700-HRF) 1.
PAGE 150
Bulletin 700-HR Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 81.5 (3-7/32) Mode 3 2 4 0 6 Range 78 (3.07) 63.7 (2.51) 0.7 (0.03) 48 (1-57/64) 5 hrs 6 (.24) Up 1 48 SQ (1-57/64 SQ) 15 (.59) Power A 15 (19/32) 52.3 (2-1/16) 39 (1.54) Unit 44.8 (1.76) Cat. No.
PAGE 151
Bulletin 700-HS Plug-in Timing Relays Overview/Product Selection Bulletin 700-HS Table Of Contents • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . Timing Relay (On-Delay or Off-Delay) Rugged Blade Style Quick Connect Socket Mounting 12 A, DPDT Contact Rating 0.
PAGE 152
Bulletin 700-HS Plug-in Timing Relays Product Selection, Continued Fixed Timing Relays ➊ Description Bulletin 700-HSF fixed timing relays feature a plug-in square base with blade style terminations. Construction is the same as the Bulletin 700-HS timing relay except that the adjustment knob has been removed to help prevent unwanted tampering. The timing and output specifications are identical to those of the Bulletin 700-HS timing relay. Setting will be ±5% of the time ordered. Socket: Cat. No.
PAGE 153
Bulletin 700-HS Plug-in Timing Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Socket — Panel or DIN Rail Mounting Guarded Terminal Construction 11-blade socket for use with Bulletin 700-HB and -HJ relays and -HS timing relays. 1 700-HN153 ✔ Screw Terminal Base Socket — Panel or DIN Rail Mounting Open Style Construction 11-blade for use with Bulletin 700-HB and -HJ relays and -HS timing relays. Order must be for 10 sockets or multiples of 10.
PAGE 154
Bulletin 700-HS Plug-in Timing Relays Specifications ➊ Cat. No. 700-HS… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) NEMA B300 12 A 250V IEC, 300V UL/CSA Hp Make Rated Insulation Voltage (Ui) Inductive Contacts Make Break 3 120V AC 240V AC 3 0A 15 A A 1.
PAGE 155
Bulletin 700-HS Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 84.9 (3-3/4) 70.6 (2-25/32) 35.7 (1-13/32) 38.9 (1-17/32) 7.2 (9/32) Bulletin 700-HS Timing Relay (Bulletin 700-HSF without knobs) 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No.
PAGE 156
Bulletin 700-HT Plug-in Timing Relays Overview/Product Selection Bulletin 700-HT Table Of Contents • • • • • Product Selection . . . . . . . 156 Accessories . . . . . . . . . . . . 158 Specifications . . . . . . . . . . 159 Approximate Dimensions . . . . . . . . . . . . 160 Timing Relay (On-Delay or Off-Delay) Rugged Pin Style Socket Mounting 10 A, DPDT Contact Ratings 0.1 s…30 min. Single or Fixed Timing Single Range Timing Relay with Pin Style Terminations Wiring Diagrams Timing Mode U.S.
PAGE 157
Bulletin 700-HT Plug-in Timing Relays Product Selection, Continued Fixed Timing Relays ➊ Description Bulletin 700-HTF Fixed Timing Relays feature a plug-in tube base. Construction is the same as the Bulletin 700-HT relay except that the adjustment knob has been removed to help prevent unwanted tampering. The timing and output specifications are identical to those of the Bulletin 700-HT relay. Setting time will be ±5% of the time ordered. Socket: Cat. No. 700-HN100 or 700-HN125 (On-Delay) Cat. No.
PAGE 158
Bulletin 700-HT Plug-in Timing Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Guarded Terminal Construction 8-pin for use with DPDT Bulletin 700-HA relays, -HX digital timing relays, -HT (On-Delay) and -HRM, -HRC and -HV (Repeat Cycle) timing relays. Order must be for 10 sockets or multiples of 10.
PAGE 159
Bulletin 700-HT Plug-in Timing Relays Specifications ➊ Cat. No. 700-HT… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) Rated Insulation Voltage (Ui) Inductive Contacts Make Break 120V AC 240V AC 30 A 15 A 3A 1.
PAGE 160
Bulletin 700-HT Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 87.4 (3-7/16) 60.3 (2-3/8) 73 (2-7/8) 44.5 (1-3/4) Bulletin 700-HT Timing Relay (Bulletin 700-HTF without knobs) 24.6 (31/32) 40.1 (1-37/64) 22 12 5 4 24 30 (1-3/16) 14 20.8 (53/64) 26 (1-1/32) 2 6 1 8 24.9 (63/64) 7 3 54.9 (2-5/32) 65 (2-35/64) 7 51.1 2-1/64) 2 8 1 21 11 A2 4.
PAGE 161
Bulletin 700-HV Plug-in Timing Relays Overview/Product Selection Bulletin 700-HV Table Of Contents • • • • • • Repeat Cycle Timing Relay 10 A Contact Rating DPDT Pin Style Terminals 0.1 s…30 min. Repeat Cycle Adjustable Timing Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . .
PAGE 162
Bulletin 700-HV Plug-in Timing Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Guarded Terminal Construction 8-pin for use with DPDT Bulletin 700-HA relays, -HX digital timing relays, -HT (ONDelay) and -HRM, -HRC and -HV (Repeat Cycle) timing relays. Order must be for 10 sockets or multiples of 10. 10 700-HN100 ✔ DIN Rail Mounting Pack Standard 35 x 7.5 mm DIN Rail, 1 meter long, 10 rails per package.
PAGE 163
Bulletin 700-HV Plug-in Timing Relays Specifications ➊ Cat. No. 700-HV… Cat. No. 700-HVF… Electrical Ratings Pilot Duty Rating ➋ Rated Thermal Current (Ith) NEMA B300 Rated Insulation Voltage (Ui) 250V IEC, 300V UL/CSA 10 A Contacts Inductive Make Break Hp Make Break Hp 120V AC 240V AC 30 A 15 A 3A 1.5 A 1/3 1/2 30 A 15 A 3A 1.
PAGE 164
Bulletin 700-HV Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 87.4 (3-7/16) 60.3 (2-3/8) 73 (2-7/8) 44.5 (1-3/4) Bulletin 700-HV Timing Relay (Bulletin 700-HVF without knobs) 50 (63/64) 5.2 (13/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No. 199-DR4 DIN Mounting Rail Series B Has No Mounting Holes Cat. No.
PAGE 165
Bulletin 700-HX Plug-in Timing Relays Overview/Product Selection Model Bulletin 700-HX Table Of Contents • • • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . . Digital Timing Relay with LCD Display Socket or Panel Mounted (NEMA 4/ IP66) 5A, B300, SPDT Contact Ratings 10 Functions or Modes Environmentally Friendly — Flash Memory, No Battery User Manual 700-UM002A-EN-D Available at http://www.
PAGE 166
Bulletin 700-HX Plug-in Timing Relays Accessories Description Pkg. Qty. Cat. No. Factorystocked Item Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Guarded Terminal Construction 8-pin for use with Bulletin 700-HX timing relays. Order must be for 10 sockets or multiples of 10. 10 700-HN100 ✔ Screw Terminal Tube Base Sockets — Panel or DIN Rail Mounting Open Style Construction 8-pin for use with Bulletin 700-HX timing relays. Order must be for 10 sockets or multiples of 10.
PAGE 167
Bulletin 700-HX Plug-in Timing Relays Specifications ➊ Pilot Duty Rating Rated supply voltage Operating voltage range Power consumption Inrush Current 100…240V AC 24V AC/12…24V DC 100…240V AC 24V AC/12…24V DC 120V AC Make Electrical Ratings NEMA B300 100 to 240V AC, 24V AC/12 to 24V DC (50/60Hz) (permissible ripple: 20%(p-p) max.) 85%…110% of rated supply voltage 4.3 VA 3.4 VA/1.7 W 3A 5A 30 A 15 A 240V AC 120V AC 3A 1.
PAGE 168
Bulletin 700-HX Plug-in Timing Relays Specifications, Continued Insulation resistance Dielectric strength Noise immunity Static immunity Vibration resistance Shock resistance Life expectancy EMC Approved standards Enclosure ratings Weight Certifications Standards Malfunction Malfunction Mechanical Electrical Characteristics ➊ 100 MΩ min. (at 500V DC) 2000V AC, 50/60Hz for 1 min.
PAGE 169
Bulletin 700-HX Plug-in Timing Relays Operating Modes One-shot Timing Charts Sustained output One-shot outputs can be to set to 0.1 s, 0.5 s, 1s, 5 s, 10 s, 20 s. Output mode A Mode: Signal ON-Delay (Timer resets when power comes ON.) Timing starts when the start signal goes ON. While the start signal is ON, the timer starts when power comes ON or when the reset input goes OFF. The control output is controlled using a sustained or one-shot rime period.
PAGE 170
Bulletin 700-HX Plug-in Timing Relays Timing Charts, Continued Output mode B: Repeat Cycle (Timer resets when power comes ON.) Sustained Output Timing starts when the start signal goes ON. The status of the control output is reversed when time is up (OFF at start). While the start signal is ON, the timer starts when the power comes ON or when the reset input goes OFF.
PAGE 171
Bulletin 700-HX Plug-in Timing Relays Timing Charts, Continued Output mode D: Signal OFF-delay (Timer resets when power comes ON.) Power Start signal Basic Operation ➊ Gate Reset Control output Set value UP Timing diagram The control output is ON when the start signal is ON (except when the power is OFF or the reset is ON). The timer is reset when the time is up. 0 Set value DOWN 0 Power ** Start signal input Timing Output * Output functions only during start signal input when setting is 0.
PAGE 172
Bulletin 700-HX Plug-in Timing Relays Timing Charts, Continued Z Mode Output quantity can be adjusted by changing the cycle time set in the adjustment level to 1 and by changing the ON duty (%) set value. The set value shows the ON duty (%) and can be set to a value between 0 and 100 (%). When the cycle time is 0, the output will always be OFF. When the cycle time is not 0 and when ON duty has been set to 0 (%), the output will always be OFF.
PAGE 173
Bulletin 700-HX Plug-in Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 58 (2.28) 44.8 (1.76) 700-HX MODE RST 48 (1.89) 6 (.24) 78 (3.07) Cat. No. 700-HX… 45 (1-25/32) 45 (1-25/32) Cat. No. 700-HX… Panel Cutout 5.2 (13/64) 50 (63/64) 6.2 (15/64) 12.5 (1/2) D A B C 1000 (39-3/8) Cat. No. 199-DR1 DIN Mounting Rail Series B Cat. No.
PAGE 174
Bulletin 700-HXM Timing Relays Overview/Product Selection Bulletin 700-HXM Table Of Contents • • • • • • Product Selection . . . . . . . 174 Accessories . . . . . . . . . . . . 175 Specifications . . . . . . . . . . 176 Approximate Dimensions . . . . . . . . . . . .
PAGE 175
Bulletin 700-HXM Timing Relays Accessories Description Replacement Flush Mounting Adapter (One shipped with each 700-HXM66Z24) Pkg. Qty. Cat. No. Factory-stocked Item 1 700-HN141 ✔ Cat. No.
PAGE 176
Bulletin 700-HXM Timing Relays Specifications ➊ ➋ Electrical Ratings Pilot Duty Rating Rated supply voltage Operating voltage range Power consumption NEMA B300 24 VDC 85%…110% of rated supply voltage 1.5 W max. (for max. DC load) (Inrush current: 15 A max.) 30 A 120V AC Make 15 A 240V AC 120V AC 3A 1.
PAGE 177
Bulletin 700-HXM Timing Relays Specifications, Continued Timer function Insulation resistance Dielectric strength Noise immunity Static immunity Vibration resistance Shock resistance Life expectancy Ambient temperature Ambient humidity EMC Approved standards Enclosure ratings Weight Certifications Standards Malfunction Malfunction Mechanical Electrical Operating Storage Characteristics Signal start: ±0.03% ±30 ms max. Power-ON start: ±0.03% ±50 ms max. 100 MΩ min.
PAGE 178
Bulletin 700-HXM Timing Relays Operating Mode Input/Output Modes and Count Values Note: H = Short-circuited L = Open Up (Increment) Mode ➊ CP1: Count Input CP1 H L CP2 H L Down (Decrement) Mode ➊ CP1: Count Input CP2: Count prohibit input CP1 H L CP2 H L Count prohibit CP2: Count prohibit input Count prohibit n UP n-1 5 n-2 4 Count Count 3 n-3 n-4 2 n-5 1 Input edge 0 0 CP1: Count Input CP1 H L CP2 H L CP1: Count Input CP2: Count prohibit input CP1 H L CP2 H L CP2: Cou
PAGE 179
Bulletin 700-HXM Timing Relays Operating Mode, Continued Input/Output Mode Settings Counter Function If there is a power failure during output ON, output will turn ON again when the power supply has recovered. For one-shot output, an output will be made again for the duration of the output time setting once the power supply has resumed. Output timing restarted during one-shot outputs is ignored. Note: t-a:Less than the output time t:Output time Input Mode Up Down Up/Down B.
PAGE 180
Bulletin 700-HXM Timing Relays Operating Modes, Continued Timer Function B Mode: Repeat Cycle➊ Power supply Power supply Start Start Gate Gate Reset Control output SV Up 0 SV Down 0 Reset Control output SV Up 0 SV Down 0 Time display Time display A Mode: Signal ON-Delay ➊ E Mode: One Shot Power supply Start Start Gate Gate Reset Control output SV Up 0 SV Down 0 Reset Control output SV Up 0 SV Down 0 Time display Time display D Mode: Signal OFF-Delay Power supply F Mode: Accumulative
PAGE 181
Bulletin 700-HXM Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 7 (0.27) 44.8 (1.76) 3.3 (0.12) 35 1.37) 24 (0.94) 3.4 (0.13) 22 (0.86) 1.6 (0.06) 48 (1.88) 80 (3.14) Cat. No.
PAGE 182
Industrial Relays Overview Industrial Relays Importance of Double-Break Contacts This design provides better protection against contact welding than single break design. Other benefits include greater DC load breaking capability and better isolation. It also provides separation of N.O. and N.C. circuits, unlike standard “Form C” contacts. Double-break contacts open the circuit in two places, creating two air gaps. It is analogous to having two contacts in series.
PAGE 183
Industrial Relays Overview, Continued Relay Load Life Comparison—Pilot Duty Loads (solenoid valve, contactor coil, relay coil) Ten Million ops One Million ops One Hundred Thousand ops Ten Thousand ops 1 2 34 6 8 10 ops = operations AC Load - steady-state inductive current (A) Typical Allen-Bradley Industrial Relay Range Typical Plug-in Relay Range Does not change conditions of sales or warranty.
PAGE 184
Industrial Relays Overview, Continued Safety Relay Output Block Diagram This diagram illustrates how 2 industrial relays can be used to expand safety relay outputs.
PAGE 185
Bulletin 700-CF Industrial Relays Overview, Continued 700-M/MB 700-CF 700S-CF 700-P 700S-P 700-R Y➋ Y Y Y➌ Y➌ N Double-break contacts Y Y Y Y Y — Switch millions of operations at >1 A Y Y Y Y Y Y Low-energy switching Y Y Y Y Y Y Marine certification— vibration applications Y Y Y Y Y Y Number of circuits to switch (number of poles) 4…8 4…12 8…12 2…12 2…12 2…8 Current ratings at 120V AC 10 A 12 A 12 A 10…35 A 10 A 5A N Y N Y N Y Electronic timer op
PAGE 186
Bulletin 700-CF Industrial Relays Overview/Product Selection Bulletin 700-CF Table Of Contents • • Product Selection . . . . . . . 186 Accessories . . . . . . . . . . . . 188 Specifications . . . . . . . . . . 193 Approximate Dimensions . . . . . . . . . . . .
PAGE 187
Bulletin 700-CF Industrial Relays Product Selection, Continued 6- and 8-Pole Relays Cat. No. 700-CFZ 1420 Cat. No. 700-CFZ 0530 Control Relays with Overlapping Side-Mounted Contacts AC-12 AC-15 Ith [A] Ie [A] Left Aux. Relay Arrangement Contacts Right Aux. 40°C 60°C 24/48V 120V 240V 400V 500V 600V 690V Main Relay 25 Side Contacts: 20 10 16 6 14 6 10 6 5 3 2.5 2 1.8 2 7 5 88 6 7 5 88 6 Overlapping Side-Mounted Contacts N.O. N.C. Cat. No. ➊ N.O. N.C.
PAGE 188
Bulletin 700-CF Industrial Relays Accessories Auxiliary Contacts Description Connection Diagrams Auxiliary Contact Blocks for Front Mounting ➊➌ • 2- and 4-pole • Quick and easy mounting without tools • Mutual positive guidance to the main contactor poles (except for L types) • Models with equal function with several terminal numbering choices L = Late break/Early make N.O. N.C.
PAGE 189
Bulletin 700-CF Industrial Relays Accessories, Continued Control Modules Connection Diagrams Description Pneumatic Timing Module — ON Delay (1 N.O. + 1 N.C.) Timed contact operates after the time delay. Relay contact operates instantaneously. • Cat. No. 100-FPTA30 Mount on front of 700-CF Relay ON-Delay 0.3…30 s Range 1.8…180 s Range Repeat Accuracy 25…90 ms for AC Coils Continuous adjustment range For Use With Cat. No.
PAGE 190
Bulletin 700-CF Industrial Relays Accessories, Continued Control Modules, Continued Connection Diagrams Description For Use With Cat. No. ➋ 700-CF 100-FL11⊗ Mechanical Latch—Mount on front of 700-CF Relay In contactors and relays with latching, the coil is immediately switched off after closing by the contact on the latch (65 – 66). Consequently, no holding current flows. It can be used with all Bulletin 100-C contactor and Bulletin 700-CF relay models with AC operating mechanism (with AC coils).
PAGE 191
Bulletin 700-CF Industrial Relays Accessories, Continued Description Connection Diagrams Interface (Solid-state)—Mount on top of 700CF Relay Interface between the DC control signal (PLC) and the AC operating mechanism of the contactor or relay. • • • Cat. No. 100-JE • • • Cat. No. ➊ For Use With Input: 18…30V DC Output: 110…240V AC Interfaces a single DC control signal (12…48V DC) to a 100-C contactor or 700-CF relay. Controls 110…240V AC coils on 100-C contactor and 700-CF relay.
PAGE 192
Bulletin 700-CF Industrial Relays Accessories, Continued Assembly Components Description Cat. No. 100-SCCA Cat. No. ➊ For Use With Pkg. Qty. 700-CF, all 10 100-SCCA 100-FA, FB, FC, FP, FL 1 100-SCFA Protective Covers Provides protection against unintended manual operation For contactors and front mounted auxiliary contacts • • Cat. No. 100-SCFA Uniform labelling materials for contactors, motor startup equipment, timing relays and circuit breakers. Marking Systems Cat. No.
PAGE 193
Bulletin 700-CF Industrial Relays Specifications General Main Relay Cat. No. 700-CF ➌ A600, P600 Contact Ratings — NEMA Min. Contact Rating Sidemounted Contacts A600, Q600 Standard 20V, 10 mA Gold 12V, 8 mA Contact Ratings — IEC AC-15 (solenoids, contactors) at rated voltage IEC 947, EN 60947 Mechanical Life 24V 16 A 6A 6A 48V 16 A 6A 6A 120V 14 A 6A 6A 240V 10 A 5A 3A 400V 5A 3A 2A 480V/500V 2.5 A 1.6 A 2A 600V 1.8 A 1.2 A 1.2 A 1A 1.
PAGE 194
Bulletin 700-CF Industrial Relays Specifications, Continued Control Circuit General Cat. No. 700-CF Cat. No. 700-CF Operating Voltage Rated Insulation Voltage Ui AC 50/60 Hz [x Us] 0.85…1.1 IEC 690V [x Us] 0.3…0.6 UL; CSA 600V [x Us] 0.8…1.1 Rated Impulse Strength Uimp 8 kV [x Us] 0.1…0.6 High Test Voltage Pickup Dropout DC ➊ Pickup Dropout Coil Consumption 1 minute (per IEC 947-4) AC 50/60 Hz DC Inrush [VA/W] 70/50 Seal [VA/W] 8/2.6 AC 115, 230, 400, 500, 690V [W] 6.
PAGE 195
Bulletin 700-CF Industrial Relays Specifications, Continued Contact Rating Table from EN 947-5-1 Examples of Contact Rating Designation Based on Utilization Categories Rated Operational Current Ie (A) at Rated Operational Voltage Ue Conventional Thermal Current Ithe (A) NEMA Designation ➊ IEC Utilization Category 120V 240V 380V 480V 500V 600V Make Break A150 AC-15 10 6 — — — — — 7200 720 A300 AC-15 10 6 3 — — — — 7200 720 A600 AC-15 10 6 3 1.9 1.5 1.4 1.
PAGE 196
Bulletin 700-CF Industrial Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended for manufacturing purposes. Mounting Position c2 ➋ ➊ c1 AC Control Relay c Side View Front View DC Control Relay Relay Type 700-CF 700-CF___Z a b c c1 c2 ∅d d1 d2 60 (2-23/64) 35 (1-25/64) 60 (2-23/64) 35 (1-25/64) 45 (1-25/32) 81 (3-3/16) 80.5 (3-11/64) 75.5 (3-3/32) 6 (1/4) 2 screws 4.
PAGE 197
Bulletin 700S-CF Industrial Relays Overview/Product Selection Bulletin 700S-CF Table Of Contents • • • • Product Selection . . . . . . 197 Specifications . . . . . . . . . 199 Approximate Dimensions . . . . . . . . . . .
PAGE 198
Bulletin 700S-CF Industrial Relays Product Selection, Continued Ordering Details Type CF Control Relays — 8-Pole DC Voltage DC-1 DC-11 and DC-15 Connection Diagrams Ie [A] Ie [A] Main Contacts 40°C 60°C 24/48V 120V 240V 400V 500V 600V 690V A1 Contacts Catalog Number ➊ ➋ Auxiliary Contacts N.O. 13 21 33 43 53 61 71 81 14 22 34 44 54 62 72 82 13 21 33 43 53 61 71 83 14 22 34 44 54 62 72 84 K1 A2 25 20 16 14 10 5 2.5 1.
PAGE 199
Bulletin 700S-CF Industrial Relays Specifications General Main Relay Cat. No. 700S-CF ➌ A600, P600 Contact Ratings — NEMA Standard Min. Contact Rating Sidemounted Contacts A600, Q600 Mechanical Life 20V, 10 mA Gold Contact Ratings — IEC AC-15 (solenoids, contactors) at rated voltage IEC 947, EN 60947 12V, 8 mA 24V 16 A 6A 6A 48V 16 A 6A 6A 120V 14 A 6A 6A 240V 10 A 5A 3A 400V 5A 3A 2A 480V/500V 2.5 A 1.6 A 2A 600V 1.8 A 1.2 A 1.2 A 1A 1.
PAGE 200
Bulletin 700S-CF Industrial Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended for manufacturing purposes. c2 ➊ c1 c AC Safety Control Relays a b 45 (1-25/32) c 81 (3-3/16) c1 119.5 (4-3/4) ∅d c2 114.5 (4-43/64) 6 (1/4) d1 2 - 4.5 (2 - 3/16) d2 Cat. No. 60 (2-23/64) 35 (1-25/64) d1 d2 700S-CF DC Safety Control Relays a b 45 (1-25/32) c 81 (3-3/16) c1 145.5 (5-49/64) 140.5 (5-37/64) ∅d c2 6 (1/4) 2 - 4.
PAGE 201
Bulletin 700S-CF Industrial Relays Approximate Dimensions, Continued .
PAGE 202
Bulletin 700S-P Industrial Relays Product Selection/Overview Bulletin 700S-P Table Of Contents • • • • • • • • • Product Selection . . . . . . . 202 Specifications . . . . . . . . . . 203 Approximate Dimensions . . . . . . . . . . . .
PAGE 203
Bulletin 700S-P Industrial Relays Specifications Type 700S-P Electrical 10 A @ 600V AC 5 A @ 600V DC NEMA A600 NEMA P600 10V, 50 mA Volts DC 64 125 250 500 2.2 A 1.1 A 0.55 A 0.24 A 10 A 5A 2A 0.7 A — 7A 3A 1.5 A — 10 A 5A 2.5 A 1.
PAGE 204
Bulletin 700S-P Industrial Relays Approximate Dimensions Dimensions are shown in millimeters (inches). Dimensions are not intended for manufacturing purposes. AC – 97.63 (3-27/32) DC – 120.49 (4-3/4) 57.15 (2-1/4) 7.94 (5/16) 89.69 (3-17/32) 79.38 (3-1/8) Provision for 2–#8/#10 Mfg. Screws 2-pole and 4-pole Bulletin 700S-P Relay Approximate Shipping Weight AC – 0.68 kg (1.5 lbs.), DC – 1.34 kg (2.95 lbs.) AC – 130.97 (5-5/32) 57.15 (2-1/4) DC – 153.83 (6-1/16) 7.94 (5/16) 89.63 (3-17/32) 79.
PAGE 205
Bulletin 700-M Industrial Relays Overview/Product Selection Bulletin 700-M Table Of Contents • • • • Product Selection . . . . . . Accessories . . . . . . . . . . . Specifications . . . . . . . . . Approximate Dimensions . . . . . . . . . . .
PAGE 206
Bulletin 700-M Industrial Relays Product Selection, Continued ⊗ DC Voltage Suffix Code The Cat. No. as listed is incomplete. Select a voltage suffix code from the table below to complete the Cat. No. Example: Cat. No. 700DC-MB400⊗S becomes Cat. No. 700DC-MB400Z24S. To order a relay with a diode surge suppressor, in a 24V DC coil, change the letter “Z” to “D”. Example: Cat. No. 700DC-MB220Z24 becomes Cat. No. 700DC-MB220D24 (coil tab is green for diode.
PAGE 207
Bulletin 700-M Industrial Relays Specifications Mini-Relays Cat. Nos. 700-M… and 700-MB… Electrical AC Operating Range DC AC Coil Consumption DC Pick-Up 85…110% nominal coil voltage Drop-Out 35…65% nominal coil voltage Pick-Up 80…110% nominal coil voltage Drop-Out 10…25% nominal coil voltage Inrush 22 VA Sealed 4 VA Inrush 2.5 W Sealed 2.
PAGE 208
Bulletin 700-M Industrial Relays Specifications, Continued Timers Cat. No. 196-M 196-MSD Electrical AC only, 50/60 Hz 110V –23%…120V +10% 220V –20%…240V +10% AC and DC 110V –23%…250V +10% Operational Voltage Voltage Drop Load current for reliable function Load current at20°C (68°F) 40°C (104°F) 55°C (131°F) Leakage current at 220V Time range (delayed operation) 5V maximum 5V maximum 10 mA minimum 10 mA minimum 600 mA 440 mA 320 mA 600 mA 440 mA 320 mA 5 mA Y 17 mA, ∆ 6 mA 0.
PAGE 209
Bulletin 700-M Industrial Relays Specifications, Continued Contact Ratings Description Cat. No. Rated Thermal Current 700-MB… and Auxiliary Contacts 700-M… Ith Open ➊ 10 A 16 A Ith Enclosed ➊ 6A 12 A 10 A @ 300V AC NEMA A300 ➋ 2.5 A @ 300V DC NEMA Q300 ➋ 10 A @ 600V AC NEMA A600 ➋ 2.5 A @ 600V DC NEMA Q600 ➋ Contact Ratings Continuous Make/Break IEC 947 AC-15 (Switching Solenoid) Make/Break IEC 947 DC-13 12…120V 220…240V 360…400V 480…500V 5.0 A 2.5 A 2.0 A 2.
PAGE 210
Bulletin 700-M Industrial Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 77 (3-5/64) 45 (1-13/16) 4 (1/16) 50 (1-31/32) 56 (2-15/64) 5 (3/16) 74 (2-59/64) 48 (1-29/32) 4 (1/16) 78 (3-7/64) 48 (1-29/32) 4 (1/16) 47 (1-7/8) Mini-contactor or mini-relay with auxiliary contact adder deck or timer mounted to front. Cat. No.
PAGE 211
Bulletin 700-P Industrial Relays Overview/Product Selection Bulletin 700-P Direct Drive™ Convertible Contact Cartridge Relays • • • • NEMA and IEC Ratings Easy Accessory Additions: Adder Decks Time Delay Latching Surge Suppressors Mounting Strip Expands Safety Relay Output Can Accommodate Ring Tongue Terminals Table of Contents Product Selection . . . . . . . 211 Accessories . . . . . . . . . . . . 218 Specifications . . . . . . . . . . 223 Approximate Dimensions. . . . . . . . . . . .
PAGE 212
Bulletin 700-P Industrial Relays Product Selection, Continued Electrically Held Relays DC-Operated Relays Contacts➊➋ N.O. N.C. 2 — Contact Arrangement and Markings K1 A1X➌ A2X A3X A4X ➌ K2 A3Y Open Type – Without Enclosure Cat. No. ➏ Type 1 General Purpose Enclosure Cat. No.
PAGE 213
Bulletin 700-P Industrial Relays Product Selection, Continued Electrically Held Relays Bulletin 700-PK Master Contact Cartridges ➊ AC-Operated Relays Contacts N.O. N.C. 2 — Contact Arrangement and Markings K1 A1X ➋ K2 A1Y A2X A4X ➋ A3X Open Type – Without Enclosure Cat. No. ➎ Type 1 General Purpose Enclosure Cat. No.
PAGE 214
Bulletin 700-P Industrial Relays Product Selection, Continued Electrically Held Relays — Typical Wiring Diagrams EMERGENCY STOP L1 MASTER CONTROL RELAY START STOP L2 MCR Surge Suppressor MCR MCR 20A 700-N5 or 700-N24 Standard Cartridge 700-CP1 L1 EMERGENCY STOP MASTER CONTROL RELAY START STOP MCR 20A L2 MCR Surge Suppressor MCR MCR 35A Latch Latch K1 K2 Reset Unlatch K3 CRL K4 CRL Control Heating Lighting Single Phase 214 700-N5 or 700-N24 Standard Cartridge 700-CP1 MCR 35A
PAGE 215
Bulletin 700-P Industrial Relays Product Selection, Continued Electrically Held Relays Bulletin 700-PH 35A Tandem Contact Cartridges ➊ ➋ AC-Operated Relays Contacts N.O. N.C. 1 — 2 — 3 Contact Arrangement and Markings K1 A1X ➋ A2X A3X A4X K2 A2Y A3Y A4Y A1Y B1X ➌ — B2X B3X B4X B2Y B3Y B4Y C2X C4X Open Type – Without Enclosure Cat. No. ➎ Type 1 General Purpose Enclosure Cat. No.
PAGE 216
Bulletin 700-P Industrial Relays Product Selection, Continued Time Delay Relays — Open Type With Pneumatic Time-Delay Attachment • Timing Options: (see page 220 ) • • • Pneumatic Timers — Factory- or Field-Installed Solid-State Timers — Field-Installed Factory-Assembled Bulletin 700-PT and PKT Timing Relays • • • • • 0, 2, or 4 instantaneous contacts 2 timed contacts — both ON Delay or both OFF Delay Convertible from ON Delay to OFF Delay and vice versa Standard contact cartridges rated NEMA A600 (AC
PAGE 217
Bulletin 700-P Industrial Relays Product Selection, Continued Mechanical Latching Relays • • • • • • Mechanical latch options — factory- or field-installed Converts all poles to latching AC latch coil — max. 6 poles latching DC latch coil — max. 5 poles latching Latching relays have 2 coils — latch coil is the relay coil, reset coil is on the latch attachment Latch/reset coils can have 2 AC coils, 2 DC coils, or 1 AC and 1 DC coil (e.g.
PAGE 218
Bulletin 700-P Industrial Relays Product Selection, Continued 700S-P Safety Control Relays ➊ ➋ Contacts N.O. 3 Relays with 120V AC Coils Cat. No. ➌ Contact Arrangements and Markings N.C. K1 A1X A2X A3X A4X K2 A1Y A2Y A4Y 1 700S-P310A1 K1 2 A1X A3Y A2X A3X A4X 700S-P220A1 2 K2 K1 6 A1Y A2Y A1X A2X A3X A3Y A4Y A4X 2 5 700S-P620A1 K2 A1Y A2Y K1 A1X A2X A3X A3Y A4Y A4X 700S-P530A1 3 K2 Contacts N.O.
PAGE 219
Bulletin 700-P Industrial Relays Accessories, Continued Adder Decks Description N.O. Contacts Continuous N.C. Carrying Current (A) 2 — 10 2 — 20 Cat. No. ➋ Arrangement B1X 700-PB20 B4X Second Deck (2-pole) 700-PKB20 B1Y Second Deck Cat. No. 700-PB40 4 — 10 4 — 20 B4Y B1X B2X B3X B4X B1Y B2Y B3Y B4Y 700-PB40 Second Deck (4-pole) 2 — 10 2 — 20 700-PKB40 C1X 700-PC20 C4X Third Deck (2-pole) Third Deck Cat. No.
PAGE 220
Bulletin 700-P Industrial Relays Accessories, Continued Pneumatic Time-Delay Unit – 1 N.O. and 1 N.C. Convertible Contact Cartridge ➊ Description Mode Continuous Carrying Current (A) Contacts N.O. N.C. Arrangement Timing Range Cat. No. ➋ D1X D2X 700-PT 10 On-Delay/ Off-Delay 1 Open Type Without Enclosure 1 0.1…60 s. 20 Pneumatic Time-Delay 700-PKT D1Y D2Y Bulletin 700-PS and -PSR Solid-State Timers Description Continuous Carrying Current (A) Timing Range ➌ Cat. No. ➋ 0.
PAGE 221
Bulletin 700-P Industrial Relays Accessories, Continued Mechanical Latch Units Description Arrangement D1X D2X Continuous Carrying Current (A) Open Type Without Enclosure Cat. No. ➊ Without 700-PLL⊗ 10 700-PLL11⊗ 20 700-PKLL11⊗ Without 700DC-PLL⊗ 10 700DC-PLL10⊗ 20 700DC-PKLL10⊗ K3 AC-Operated Latch Units D1Y D2Y K4 Reset Input D1X D2X K3 DC-Operated Latch Units D1Y D2Y K4 ⊗ AC Voltage Suffix Code The Cat. No. as listed is incomplete.
PAGE 222
Bulletin 700-P Industrial Relays Accessories, Continued Pkg. Qty. Cat. No. ➊ 1 700-N5 1 700-N24 1 199-FSMA9 1 199-FSMA10 1 199-FSMA11 Diode Surge Suppressor – for 6…300V DC voltage coils. Used on Bulletin 700-P, -PH, -PK, -N, -F, and -R relays. 1 199-FSMZ-1 35 A Jumper Kit – CSA Approved, UL Listed This 35 A Jumper Kit can be used with any Bulletin 700-P and -PK AC or DC relay, TimeDelay relay or Latch Unit equipped with 20 A Master Cartridges. It does not require any additional panel space.
PAGE 223
Bulletin 700-P Industrial Relays Specifications Type 700-P, PLL, PT 10 A @ 600V AC 5 A @ 600V DC NEMA A600 NEMA P600 Contact Rating Continuous AC DC Ratings Make/Break Additional Contact Ratings for AC single-phase loads — DC Current Ratings Make/Break Cartridge Cat. No. 700-CP1 Contacts in Series 1 2 3 4 DC Switching AC DC Battery Charging Coil Voltage Range Coil Consumption P-PH-PK 24 64 125 250 5 A 2.2 A 1.1 A .
PAGE 224
Bulletin 700-P Industrial Relays Specifications, Continued Operating Coils Bulletin 700-P Operating Coil Bulletin 700-PL Unlatch Coil and Magnet Assembly ➊ ➋ ➌ ➍ Bulletin 700 Bulletin 700-P-PH-PK Relays — Bulletin 700-PLL-PKLL Mechanical Latch Attachments ➊ Bulletin 700-P, -PK Bulletin 700-PLL–PKLL AC Bulletin 700-P-PK 2-…12-pole, 2-…12-pole, Mechanical Latch Coil Bulletin 700-PH 1-…6-pole DC Bulletin 700-PH 1-…6-pole AC Attachment Volts 60 Hz 50 Hz 60 Hz 50 Hz — 24 PA013 PA407 PL013 PL407 PD714 32 — —
PAGE 225
Bulletin 700-P Industrial Relays Approximate Dimensions Approximate Dimensions in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. Bulletin 700-P, -PH and -PK Relays AC – 97.63 (3-27/32) DC – 120.49 (4-3/4) 57.15 (2-1/4) AC – 165.89 (6-17/32) 57.15 (2-1/4) 7.94 (5/16) DC – 188.75 (7-7/16) 7.94 (5/16) 89.69 (3-17/32) 79.38 (3-1/8) 89.69 (3-17/32) 79.38 (3-1/8) Provision for 2–#8/#10 Mfg. Screws Provision for 2–#8/#10 Mfg.
PAGE 226
Bulletin 700-ZP Industrial Relays Overview/Product Selection Bulletin 700-ZP Table Of Contents • • • • • • Product Selection . . . . . . . 226 Specifications . . . . . . . . . . 227 Approximate Dimensions . 228 Adjustable Function and Timing Range Timing Relays DIN Rail Mounted Without Cost of Socket 17.5 mm wide, Multi-Function or Single Function Available as 1 N.O. or SPDT Contact Output Timing Ranges From 0.05 s…10.0 h Approvals: UL Listed: To U.S.
PAGE 227
Bulletin 700-ZP Industrial Relays Specifications Schematic Diagram 700-ZP Relays ➊ Basic Circuit 700-ZP100 – (1) Output Circuit (3 Relays, 9 Terminal Blocks) ➋ ➌ 700-ZP 700-Z Included in Factory Wired Units (A3X) LOAD 1 (A3Y) 700-ZP500 – (5) Output Circuit (3 Relays, 17 Terminal Blocks) • • Basic circuit plus the additional outputs shown.
PAGE 228
Bulletin 700-ZP Industrial Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. 700-ZP100A1 (3 Relays, 9 Terminal Blocks): 700-ZP500A1 (3 Relays, 17 Terminal Blocks): 700-ZP800A1 (3 Relays, 23 Terminal Blocks): 700-ZP100Z24 (3 Relays, 9 Terminal Blocks): 700-ZP500Z24 (3 Relays, 17 Terminal Blocks): 700-ZP800Z24 (3 Relays, 23 Terminal Blocks): 228 Length 342.9 (13-1/2) 342.9 (13-1/2) 400.
PAGE 229
Bulletin 700-R, -RM Sealed Switch Relays Overview Bulletin 700-R -RM Table Of Contents • • • • • • • • Product Selection . . . . . . Modifications . . . . . . . . . . Specifications . . . . . . . . .
PAGE 230
Bulletin 700-R, -RM Sealed Switch Relays Product Selection No. of Poles 0 2 4 6 8 Contacts N.O. 0 N.C. 0 2 0 1 1 0 2 4 Electrically Held ➊ AC-Operated Relay Only Open Type Type 1 Without General Purpose Enclosure Enclosure Cat. No. ➌ Cat. No. ➌ Contact Arrangement and Markings ➋ DC-Operated Relay Only Open Type Type 1 Without General Purpose Enclosure Enclosure Cat. No. ➌ Cat. No.
PAGE 231
Bulletin 700-R, -RM Sealed Switch Relays Product Selection, Continued No. of Poles Contacts Contact Arrangement and Markings ➋ N.O. N.C. 0 0 2 0 1 1 0 2 4 0 3 1 2 2 1 0 2 4 6 8 Magnetic Latching ➊ AC-Operated Relay Only Open Type Type 1 Without General Purpose Enclosure Enclosure Cat. No. ➌ Cat. No. ➌ DC-Operated Relay Only Open Type Type 1 Without General Purpose Enclosure Enclosures Cat. No. ➌ Cat. No.
PAGE 232
Bulletin 700-R, -RM Sealed Switch Relays Modifications Letter Designation Description RL Manual Actuator A factory-installed manual actuator is available for manual energization of the relay coils. To order, replace the letters “R” or “RM” after the dash in the listed catalog number with the letters listed at right. Ratings 150V AC or DC maximum. Example: Cat. No. 700-RM300A1 becomes Cat. No. 700-RMLR300A1. Manual Actuator Addition for Relay Actuation Qty.
PAGE 233
Bulletin 700-R, -RM Sealed Switch Relays Specifications Application Data – Because of the inherent characteristics of this device, the normally open contacts may close before the normally closed contacts open on energization and the normally closed contacts may close before the normally open contacts open on de-energization. Note: For Type 700-RM, energizing both the latch and unlatch coil together will cause the relay to be energized and both latch and unlatch coils can be operated together continuously.
PAGE 234
Bulletin 700-R, -RM Sealed Switch Relays Approximate Dimensions and Shipping Weights Approximate Dimensions in millimeters (inches) shown. Approximate Dimensions are not intended to be used for manufacturing purposes. C A 160.6 (6-21/64 Max.) B D Bulletin 700-R400…, -RM400… C 700 Type R A B 700-PS Timer D 700-N26 Bulletin 700-PS Timer Mounted on a 4-Pole Bulletin 700-R Relay Approximate Shipping Wt. 1.25 kg (2.75 lbs.
PAGE 235
Bulletin 700-PS Industrial Timing Relays Product Selection/Overview Bulletin 700-PS Table Of Contents • • • • Product Selection . . . . . . 235 Specifications . . . . . . . . . 236 Approximate Dimensions 237 Solid-State Timer 600V AC Maximum 300V DC Maximum UL Listed, CSA Certified Solid-State Timer Cat. No. 700-PSPA1 Bulletin 700-PS Solid-State Timer Cat. No. 700-PSPA1 0.1…2 s 0.4…8 s 1.5…30 s 6…120 s Timing Relay with Self-Contained Potentiometer Unit Cat. No.
PAGE 236
Bulletin 700-PS Industrial Timing Relays Specifications Bulletin 700-PS Supply Voltage Power Requirement Output Contact Ratings Operating Temperature Range Reset Time Repeat Accuracy, Constant Voltage and Temperature Standards Certifications Operation The timer must be energized continuously (L1-L2). ON-Delay: When the initiating contact closes, timing begins. At time-out, the output contact closes. OFF-Delay: When the initiating contact closes, the output contact closes instantly.
PAGE 237
Bulletin 700-PS Industrial Timing Relays Approximate Dimensions Approximate Dimensions are shown in millimeters (inches). Approximate Dimensions are not intended to be used for manufacturing purposes. Bulletin 700-PS 55.6 (2-3/16) 77.8 (3-1/16) 88.9 (3-1/2) 63.5 (2-1/2) 700 Type P 79.2 (3-1/8) 2 Mounting Screws With Springs Cat. No. 700-N25 164.7 Max. (6-31/64) 5.
PAGE 238
Bulletin 700-RTC Industrial Timing Relays Overview Bulletin 700-RTC Table of Contents • • • • • Product Selection . . . . . . . 239 Accessories . . . . . . . . . . . . 241 Specifications . . . . . . . . . . 242 Approximate Dimensions . 242 • • • • • • • • • 238 Timing Functions 8 ON-Delay 8 OFF-Delay Timing Ranges Seconds: 0.05…2, 0.2…8, 0.4…30, 2…120 Minutes: 0.015…1, 0.06…4, 0.
PAGE 239
Bulletin 700-RTC Industrial Timing Relays Product Selection Bulletin 700-RTC Relay – Relays with Provision for Instantaneous Contacts Relays listed below have slots for two timed contacts and two instantaneous contacts. Unused slots are equipped with removable dummy cartridges. Open Type Without Enclosure Number of Contact Cartridges Total 0 1 2 3 4 Instantaneous N.O. N.C.
PAGE 240
Bulletin 700-RTC Industrial Timing Relays Product Selection, Continued Bulletin 700-RTC Relays with Fixed Time Delay— Relays with Provision for Instantaneous Contacts Relays listed below have slots for two timed and two instantaneous contacts. Unused slots are equipped with removable dummy cartridges. Total 0 1 2 3 4 Number of Contact Cartridges Timed Instantaneous N.O. N.C. N.O. N.C.
PAGE 241
Bulletin 700-RTC Industrial Timing Relays Accessories Description Cat. No. 700-CRT5 Cat. No. 700-CRT6 Cat. No. 700-CR9 Contact Cartridges – These cartridges are used to add contacts to timing relays having unused slots. The N.O., N.C., and “Dummy” cartridges are interchangeable and can be used in timed or instantaneous contact slots. “Dummy” cartridges should be placed in unused cartridge slots to guard against entrance of foreign material.
PAGE 242
Bulletin 700-RTC Industrial Timing Relays Specifications/Approximate Dimensions Voltage and Power Requirements AC Voltage +10% –15% 50/60 Hz 24V AC 110/120V AC 220/240V AC DC Voltage +10% –20% 24V DC 120V DC 240V DC Total Power Required Initiate Terminal (P) Power 8 VA 9 VA 11 VA 4 VA 4 VA 5 VA Total Power Required Initiate Terminal (P) Power 10 W 11 W 12 W 5W 5W 5W Type Contact Rating (See page 29) Maximum Allowable Leakage Current 10 mA 2.4 mA 2.
PAGE 243
Solid State Relays Interposing Relays The New Solid State Applications Solution New Cost-Saving Relay Design Rockwell Automation has broadened its Allen-Bradley relay Rockwell Automation is introducing a new and improved Allen- product line to include six new solid-state relays (SSRs). The Bradley 700-HC “Ice Cube” General Purpose Relay.
PAGE 244
Relays and Timers – Global Products You Can Trust Terminal Block Relay Product Profile Pub. No. 700-PP012B-EN-P General Purpose Relays Product Profile Pub. No. 700-PP010A-EN-P Gold Plated Contacts Product Profile Pub. No. 700-PP015A-EN-P Interposing Relays Product Profile Pub. No. 700-PP014A-EN-P Get It Now! Solid State Relays Product Profile Pub. No. 700SSR-PP001A-EN-P Three ways to get more information: Relays and Timers – Selection Guide General Purpose Timers Product Profile Pub. No.