User manual

Chapter 4: Managing the Modem Using the Console Port & Telnet
MM701G User Manual 53
UpFrameSync The Upstream Frame Sync Word parameter.
(Default: 13727)
0 to 65535
UpStuffBits The Upstream Stuffbits parameter. (Default: 15) 0 to 16
DownFrameSync The Downstream Frame Sync Word parameter.
(Default: 13727)
0 to 65535
DownStuffBits The Downstream Stuffbits parameter. (Default: 15) 0 to 16
Encoder CoeffA The encoder coefficient for the A channel. (Default: 366) 0 to 1048577
Encoder CoeffB The encoder coefficient for the B channel. (Default: 817) 0 to 1048577
MinBaseRate Used with the MinSubRate to define the minimum line
rate. (Default: 1)
MaxBaseRate Used with the MaxSubRate to define the maximum line
rate. (Default: 36)
1 to 36
MinSubRate Used with the MinBaseRate to define the minimum line
rate. (Default: 0)
0,1
MaxSubRate Used with the MaxBaseRate to define the maximum line
rate. (Default: 1)
0,1
WirePairMode Currently only SinglePair is supported. SinglePair, TwoPair
AsymmetricPSD Select between the three options: Symmetric PSD,
AsymPSDHighRate, AsymPSDLowRate.
(Default: SymmetricPSD)
SymmetricPSD,
AsymPSDHighRate,
AsymPSDLowRate
BitRateMode The method in which the modem establishes a bit rate
with the device on the other side of the DSL line (such as
the DSLAM or another MM701G). Fixed Rate attempts to
establish a connection only at the rate that is specified
while Adaptive Rate dynamically negotiates its bit rate.
(Default: Adaptive Rate)
Fixed Rate, Adaptive
Rate
TestBitRate Select a value from 72K to 2320K. (Default: 2320) 72K to 2320K
SNRMarginLimit The signal-to-noise ratio limit. This can be set between
-64 to +63. The Margin LED on the front panel indicates
when the actual SNR is greater than the configured value.
(Default: 4)
-64 to 63
SHDSL Parameter Description Values