User manual

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

FlexDSX

Cross-Connect Family

The FlexDSX

chassis accommodates four-port jack cards with dual monitor ports. Utilizing these dual monitor ports,

technicians save time by monitoring both sides of a circuit from a single test access point.

The modular FlexDSX components include the dual monitor jack, four-pack module and the chassis.

FlexDSX Front Cross-Connect Products

Description Catalog Number

FlexDSX front cross-connect products

FlexDSX front cross-connect 7' skeleton bay, 23" mounting, holds 10 chassis DFX-B7S001

FlexDSX 56-circuit loaded DSX panel; dual monitoring 19"/23" (14- 4 packs) DFX-100056

FlexDSX 64-circuit loaded DSX panel; dual monitoring 19"/23" (14- 4 packs) DFX-100064

FlexDSX 84-circuit loaded DSX panel; dual monitoring 23" (21- 4 packs) DFX-100084

FlexDSX empty chassis; 84-circuit (21- 4 packs) DFX-9T0001

FlexDSX 4-pack with dual monitoring jacks DFX-9T1000

O r d e r i n g I n f o r m a t i o n

Description Catalog Number

FlexDSX rear cross-connect products

FlexDSX rear cross-connect skeleton bay, 23" mounting, holds 14 chassis (84-circuit) DMB-77WC01

FlexDSX rear cross-connect 84-circuit loaded 23" DSX panel DFX-100084R

O r d e r i n g I n f o r m a t i o n

FlexDSX Rear Cross-Connect Products

Features and Benefits

• Four-port jack cards

Dual monitor ports enable circuit monitoring in both directions.

• Staggered jack alignment

Supports industry-standard patch cords

• Up to 84 circuits in a six-inch chassis

Increased bay density

• Integrated cable management

Jumper rings and rear cable bars are installed on the skeleton bay

• IN/OUT cable terminations on the backplane

Provides multiple circuit count configurations

PAGE 1
FlexDSX® Cross-Connect Family The FlexDSX® chassis accommodates four-port jack cards with dual monitor ports. Utilizing these dual monitor ports, technicians save time by monitoring both sides of a circuit from a single test access point. The modular FlexDSX components include the dual monitor jack, four-pack module and the chassis. Features and Benefits • Four-port jack cards Dual monitor ports enable circuit monitoring in both directions.
PAGE 2
FlexDSX Cross-Connect Accessories Quality patch cords and cross-connect cables in various configurations and lengths Ordering Information Description Catalog Number Bantam patch cords Three-conductor single 0.3 m (1') PJ712 0.92 m (3') PJ716 1.83 m (6') PJ722 3.66 m (12') PJ1212 6.1 m (20') PJ1420 Three-conductor dual 0.3 m (1') PJ762 0.92 m (3') PJ766 1.83 m (6') PJ772 3.66 m (12') PJ1312 6.