User manual

Campus-RS Fractional Interface Card User Manual 2-1
2
INSTALLING THE
CAMPUS-RS
FRACTIONAL CARD
You can mate the Fractional Interface Card with either a Campus-RS Desktop
Unit or a Campus-RS Line Unit.
The following sections describe how to install the card.
INSTALLING THE CARD IN A CAMPUS-STAR
C
HASSIS
Make sure you install the card into a Campus-RS Desktop Unit
or into a Campus-Star chassis with a Campus-RS Line Unit.
The Campus-RS Fractional Interface Card will not operate if it
is installed in an earlier version of these Campus products.
Before installing the interface card, make sure there is not a
line unit installed in the corresponding slot on the front of the
Campus-Star chassis. The interface card is not
hot-swappable. Installing the card with a corresponding line
unit installed may cause damage to the card, the line unit, or
both.