User manual

Configuring with an ASCII Terminal

Campus-RS Fractional Interface Card User Manual 5-9

SETTING THE HDSL OPERATING MODE

The Fractional Interface Card is set to operate in Standard Mode with a T1

(1.544 Mbps) HDSL Rate. This is compatible with other Campus-RS

products and with Campus-T1 Desktop Units and Line Units.

To change the HDSL Operating Mode:

1 From the Main Menu, type then press . The System Settings

Menu displays.

2 Type then press . The Standard Mode HDSL Parameters menu

displays. If the Fractional Interface Card is set to an Extended HDSL

Operating Mode, the Extended Mode HDSL Parameters menu displays.

3 ENTER

July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:07:59

Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35

Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35

Circuit ID: Network #13

SYSTEM SETTINGS MENU

1) SYSTEM PARAMETERS

2) HDSL PARAMETERS

(R)eturn

ENTER CHOICE>

ENTER