User manual

Configuring with an ASCII Terminal
5-10 Campus-RS Fractional Interface Card User Manual
3 Continue with one of the following sections, depending on whether you
are using one of the three standard HDSL modes (T1, E1, or 768), or an
extended mode.
Selecting a Standard Mode
This section continues from Step 3 in the previous section to set a Standard
HDSL mode. Choose from the following settings:
• T1
• E1
• 768
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:07:59
Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID: Network #13
STANDARD MODE HDSL PARAMETERS
1) HDSL OPERATING MODE: Standard (Standard, Extended)
2) TRANSCEIVER MODE: Auto (Master, Slave, Auto)
3) HDSL RATE: T1 (768, T1, E1)
Changes Will Not be Effective Until This Menu Is Exited!
(R)eturn (M)ain Menu
ENTER CHOICE>