User manual

Configuring with an ASCII Terminal
Campus-RS Fractional Interface Card User Manual 5-13
4 Type the number for the desired HDSL transmission rate then press
. The terminal returns to the HDSL Parameters menu and displays
the new HDSL Rate.
CONFIGURING THE DATA PORT
Set the following parameters through the Data Port Settings menu:
• Data Rate
• Timing Source
• Transmit Clock
• Clock and Data Signal Inversion
• Output Control Signals
From the Main Menu, type then press . The Data Port
Configuration Menu displays.
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:07:59
Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID: Network #13
SELECT HDSL HIGH RATE
Current HDSL Rate: 256
Current Loop Mode: 2 Loops
1) N/A 13) 1664 kbps 25) 3200 kbps
2) 256 kbps 14) 1792 kbps 26) 3328 kbps
3) 384 kbps 15) 1920 kbps 27) 3456 kbps
4) 512 kbps 16) 2048 kbps 28) 3584 kbps
5) 640 kbps 17) 2176 kbps 29) 3712 kbps
6) 768 kbps 18) 2304 kbps 30) 3840 kbps
7) 896 kbps 19) 2432 kbps 31) 3968 kbps
8) 1024 kbps 20) 2560 kbps 32) 4096 kbps
9) 1152 kbps 21) 2688 kbps 33) 4224 kbps
10) 1280 kbps 22) 2816 kbps 34) 4352 kbps
11) 1408 kbps 23) 2944 kbps 35) 4480 kbps
12) 1536 kbps 24) 3072 kbps 36) 4608 kbps
(R)eturn (M)ain Menu
ENTER CHOICE>
ENTER
2 ENTER