User manual

Configuring with an ASCII Terminal
5-22 Campus-RS Fractional Interface Card User Manual
2 Type then press . The Standard Mode HDSL Parameters menu
or Extended Mode HDSL Parameters menu displays (the following
illustration shows the Standard Mode HDSL Parameters menu).
3 Type then press . The Transceiver Mode option changes to the
next available setting.
4 Repeat the previous step until the Standard Mode HDSL Parameters
menu or Extended Mode HDSL Parameters menu displays the desired
Transceiver Mode settings.
2 ENTER
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:07:28
Local Unit ID:Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID:Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID:Network #13
STANDARD MODE HDSL PARAMETERS
1) HDSL Operating Mode: Standard (Standard, Extended)
2) Transceiver Mode: Slave (Master, Slave, Auto)
3) HDSL Rate: T1 (768, T1, E1)
Changes will not be effective until this menu is exited!
(R)eturn (M)ain Menu
ENTER CHOICE>
2 ENTER