User manual

Configuring with an ASCII Terminal

5-24 Campus-RS Fractional Interface Card User Manual

2 Type then press . The System Parameters menu displays.

3 To configure the HDSL ES Alarm Threshold, type then press .

The System Parameters menu shows the new HDSL ES Alarm

Threshold setting. Repeat this step until the desired setting displays.

4 To configure the HDSL Margin Alarm Threshold, type then press

5 Type the desired margin threshold value, or to disable then press

. The System Parameters menu shows the new HDSL Margin

Threshold setting. Repeat this step until the desired setting displays.

6 To enable or disable the local LOS alarm, type then press . The

System Parameters menu shows the new Alarm on Local I/F LOS

setting. Repeat this step until the desired setting displays.

7 To enable or disable the remote LOS alarm, type then press .

The System Parameters menu shows the new Alarm on Remote I/F LOS

setting. Repeat this step until the desired setting displays.

1 ENTER

July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:07:28

Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35

Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35

Circuit ID: Network #13

SYSTEM PARAMETERS

1) Change System Time

2) Change System Date

3) Change Unit ID

4) Change Circuit ID

5) Change Password

6) HDSL ES Alarm Threshold: Disabled (Disabled, 17, 170)

7) HDSL Margin Alarm Threshold: Disabled

8) Local Data Port LOS Alarm: Disabled (Disabled, Enabled)

9) Remote Data Port LOS Alarm: Disabled (Disabled, Enabled)

10) RESET TO FACTORY DEFAULT

(R)eturn (M)ain Menu

ENTER CHOICE>

6 ENTER

ENTER

8 ENTER

9 ENTER