User manual

Configuring with an ASCII Terminal
5-28 Campus-RS Fractional Interface Card User Manual
To set or change these identifiers:
1 From the System Parameters menu, type then press . The
system prompts you to enter the Unit ID.
2 Type a unique identifier for the unit, up to 64 characters, then press
. The system displays the System Parameters menu.
3 Type then press . The system prompts you to enter the
circuit ID.
4 Type a unique identifier for the circuit, up to 32 characters, then press
. The system displays the System Parameters menu.
CONFIGURING LOOPBACKS
Loopbacks provide a way to test the data communication path between the
Campus unit, the remote unit, and the remote host equipment. The Fractional
Interface Card supports four types of loopbacks:
• Local to Local Interface
• Remote to Local Interface
• Remote to Remote Interface
• Local to Remote Interface
See Chapter 7 for a description of each of these loopbacks.
Once a loopback condition has been initiated, it remains in effect until
cleared. You may also set a loopback timeout to clear the loopback
automatically after a set period of time has elapsed.
3 ENTER
ENTER
4 ENTER
ENTER