User manual

Configuring with an ASCII Terminal
Campus-RS Fractional Interface Card User Manual 5-29
You manage loopbacks through the Loopback Settings menu:
1 From the Main Menu, type then press . The Diagnostics menu
displays.
2 Type then press . The Loopback Settings menu displays.
3 ENTER
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:09:30
Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID: Network #13
DIAGNOSTICS MENU
1) LOOPBACK SETTINGS MENU
2) DATA & CLOCK MONITOR
3) CONTROL SIGNALS MONITOR
4) DOWNLOAD MODE
(R)eturn
ENTER CHOICE>
1 ENTER
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:09:30
Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID: Network #13
LOOPBACK SETTINGS
ACTIVE LOOPBACK: None
1) Local Data Port toward Local Data Port
2) Remote Data Port toward Local Data Port
3) Local Data Port toward Remote Data Port
4) Remote Data Port toward Remote Data Port
5) Terminate Loopbacks
6) Loopback Timeout (min): 20 (20, 60, 120, None)
WARNING: Any loopback will remove data link from service.
(R)eturn (M)ain Menu
ENTER CHOICE>