User manual

View Information and Status
Campus-RS Fractional Interface Card User Manual 6-9
1 From the Main Menu, type then press . The Diagnostics menu
displays.
2 Type then press . The Control Signals Monitor displays,
adding a new status line every second.
3 Press to close the Control Signals Monitor and return to the
Diagnostics menu.
The monitor shows each signal as on (*) or off (-). For more information
about control signals, see “Configuring Output Control Signals” on
page 5-19.
4 ENTER
3 ENTER
July 01, 2002 PAIRGAIN TECHNOLOGIES, CAMPUS RS, Version 4.3K 00:11:07
Local Unit ID: Campus V.35 Unit #19 Local I/F: FRAC V.35
Remote Unit ID: Campus V.35 Unit #27 Remote I/F: FRAC V.35
Circuit ID: Network #13
CONTROL SIGNALS MONITOR
Press ESC key to exit */- = ON/OFF
TO DCE FROM DCE
TIME RTS DTR LL RL CTS DSR RLSD LT
00:11:08 - - - - - - * -
00:11:09 - - - - - - * -
00:11:10 - - - - - - * -
00:11:11 - - - - - - * -
00:11:12 - - - - - - * -
00:11:13 - - - - - - * -
00:11:14 - - - - - - * -
00:11:15 - - - - - - * -
00:11:16 - - - - - - * -
00:11:17 - - - - - - * -
00:11:18 - - - - - - * -
00:11:19 - - - - - - * -
ESC