User's Manual
Table Of Contents
- 1. Introduction
- 2. Hardware
- 3. The A431 Radio Module
- 3.1. About the A431 Radio Module
- 3.2. Functional description
- 3.3. Manufacturing Issues
- 3.3.1. Marking and labeling issues
- 3.3.2. Alignment Range and Switching Range
- 3.3.3. Tuning Procedure
- 3.3.4. Setting Up the Default Parameters
- 3.3.5. Definitions
- 3.3.6. Test Equipment Settings
- 3.3.7. Trimming Elements
- 3.3.8. Adjusting the Receiver Front End
- 3.3.9. Adjusting the VCOs
- 3.3.10. Adjusting the Crystal Reference
- 3.3.11. Checking the Receiver Parameters
- 3.3.12. Checking the Transmitter Parameters
- 3.3.13. Data Transfer Check
- 3.6. Frequency Reference Specifications
- 3.7. A431 Module’s Photographs
- 4. Software
ADCON
TELEMETRY
ADCON TELEMETRY AG
INKUSTRASSE 24
A-3400 KLOSTERNEUBURG
AUSTRIA
TEL: +43 (2243) 38 280-0
FAX: +43 (2243) 38 280-6
http://www.adcon.at
ADCON TELEMETRY INC
1001 YAMATO ROAD
SUITE #305, BOCA RATON
FL 33431 USA
TEL: +1 (561) 989-5309
FAX: +1 (561) 989-5310
http://www.adcon.com
ADCON TELEMETRY SRL
BD. ION IONESCU DELABRAD 8
R-71592 BUCHAREST
ROMANIA
TEL: +40 (1) 490-6083
FAX: +40 (1) 490-6086
http://www.adcon.ro
Proprietary Notice:
The Adcon logo, the A730 series, A720 series and addIT™, A440 and add-
WAVE, addVANTAGE® and AgroExpert™ are trademarks or registered trade-
marks of Adcon Telemetry AG. All other registered names used throughout
this publication are trademarks of their respective owners.
This publication contains confidential information, property of Adcon Teleme-
try AG. Disclosure to third parties of the information contained herein is pro-
hibited. Neither the whole nor any part of the information contained in this
publication may be reproduced in any material form except with the prior writ-
ten permission of Adcon Telemetry AG.
Release 1.0, February, 2001
Copyright © 2001 by Adcon Telemetry AG.
All rights reserved.