I X Components OWNER'S MANUAL | INDEX Add-a-Motor Product Uses ! 2. Actuator (Ti oped) | Uni ) Window Cover | How Preoccupy Works 1 2b. Actuator {Flat) 1 Versailles Win OVI covering Motor | General Tips and X-10 Safely 1 26. Stop Switch | Traverse Drapery, Sliding Panels and Vertical || Installation Steps 283 3. Drive Whee! & Groove | Blinds, or notate Vertical Blinds. Pertain Tip 3 4. Safely Guard i X-10 and Timer Compatible.
Add-a-Gator Installation INSTALLATION STEPS: START HERE SET BOTH ACTUATORS. CLOSE TO STOP SWITCH. §— Stop Switch scissors: 2 (Tipped) 28 (Fla) Actuators set open and dosed fop potion 1. OPEN WINDOW COVERING APPROXIMATELY HALFWAY. Remove any pulley or wait, ! Loop of Cord or {1 chin ’VJ Requires 5" clearance. Lot Motor in HIGHEST soot of Wall Bracket, Make cord slight taut. G e MARK hale locations on wal, Attach Walt Bracket with 2 screws, 4. PUSH CORD UNDER BAR. Chain must be outside Bar.
S — installation continued. 5. MOTOR ON WALL BRACKET. Makeover) | 5 SLIDE MOTOR ONTO WALL BRACKET. orderly . 0 Coloring's 0 LOWER Doter on Wall Bracket and remove any slack in cord {chain). Bracket, i T MAKE cord {chain) moderately taut. LOCK Motor in nearest sot i Wall Bracket. ggaTr'suam | 01 SLIDE U-shape Safety Guard onto Motor VERTICALLY from underneath, Peg facing rear. e 1 INSERT Adapter OC putout plug Into receptacle at bottom of Gator. an. Do not orc, pog fa6i0G 5{]“ \ toward.
TIMER CONTROL: Horne security. :Energy savings. Convenience. Plug AC-DC Adapter into damp dimer switch that has a minim of 2 On and 2 OFf settings per day. Never use a timer that has a dimming capability (AC-DC Adapter will be damaged). Timer label must state that iris approved for appliance use, mortar wold, or have the designation HP, Timer ON sifting controls WHEN window covering is re positioned. The timer must be set to switch OFF after every ON.
