Datasheet

Page 1 of 2
AO-GES-XX-S
10/100/1000M Ethernet Switch 10/100/1000M Ethernet Switch
XX Fiber Port and XX UTP Port
Features
! Supports 10/100/1000Base-T, 1000Base-X protocol
! Flow control for full duplex and half duplex
! Supports Fiber Port Trunking, Increasing Fiber Channel
Bandwidth and Supply Fiber Channel Redundancy
! Flow control for full duplex and half duplex
! Supports Ports Based VLANS and TAG Based VLANS
! In conformity to safety code of FCC and CE MARK
! Supports up to 10k byte JUMBO frame
Product Description
AddOn’s Ethernet Switch is designed with a switch controller and buffer memory that
connects two types of media. The UTP port supports all 10/100/1000 Mbps RJ45 Half and
Full Duplex modules, and the SFP ports support only 1000Mbps and Full-Duplex modules.
The Ethernet Switch provides reliable and cost effective to your networking needs.
Technical Parameters
Parameter
Min
Typ
Max
Units
Standard Protocol
IEEE802.3, IEEE802.3u, IEEE802.3x
Data Rate
1000
Mbps
Operating Wavelength
830
1280
1480
850
1310
1550
860
1335
1580
nm
Fiber Interface
multi-mode: 50/125µm, 62.5/125µm or 100/140µm
single-mode: 8.3/125µm, 8.7/125µm, 9/125µm or
10/125µm
RJ45 Port
UTP-100-ohm Cat.5 cable
Max Segment Length (UTP)
0
120
m
Power Supply
AC-DC Power Adaptor (INPUT AC110-265V 50~60Hz,
OUTPUT DC +5V/2A)