研發處 研發處 研發處 2012.06 .04 2012.06.04 2012.06.04 簡文 榮 利 俊宏 盧 廉清 AD1224HB-A71GL DC FAN (RoHS) PREPARED DATE 研發 處 2012.06 .04 吳靜 心 P.S. REV. (N) A Y 研發 處 2012.06.
DATA-SHEET Engineering Printed On: 12/6/4 BRUSHLESS AXIAL COOLING FANS Customer : Adda Model No : AD1224HB-A71GL Samples attached : Safety Approval : UL,CUL,TUV,CE Ref: (RoHS) P.S: (N) Piece(s), TUV:EN 60950-1:2006+A11 UL:UL507 CE:EN 61000-6-1:2007 EN 61000-6-3:2007 Specifications ITEM SPECIFICATION / CONDITION DIMENSIONS : 120x120x25 BEARING TYPE : BALL RATED VOLTAGE : 24 VDC OPERATING VOLTAGE RANGE : 21.6 VDC - START-UP VOLTAGE : 17 VDC , NORMAL REAL CURRENT : 0.
SPECIFICATION 1.0 SCOPE 1.1 If the information or other related document is inconsistent with this acknowledgement document, please refer to the acknowledge document. 1.2 This documentation defines the mechanical & electrical characteristics of DC brushless fans. 1.3 The specification of this product is described in details in the acknowledgement document. No guarantee is given to our product under the use of over specifications. 1.
SPECIFICATION 5.0 MECHANICAL INSPECTION 5.1 Rotation Direction Counterclockwise when look into impeller side. 5.2 Protection All fans have integrated protection against locked rotor condition so that there will be no damage to winding or any electronic component. Restarting is automatic as soon as any constraint to rotation has been released. As fan placed at dead angle position, and the switch was changed from off to on. Restarting was automatic normal as soon as and proved that this fan is good fan. 5.
SPECIFICATION 8.0 REMARKS 8.1 Material and construction are subject to change without advance notice. The changes should be within specification. 8.2 All fans shall meet the quality inspection under sampling plan MIL-STD-105E as follow: Critical Major Minor 9.0 0.25% 1.00% 2.50% OUTLINE STYLING & DIMENSIONS LEAD WIRES : UL 1007, AWG24 , L = 280±10 mm Red = positive ; Black = negative. 研發 處 2012.06.04 10.0 Notes: 10.
AD1224HB-A71GL(N) 研發 處 2012.06.
研發 處 2012.06.
研發 處 2012.06.