User guide

13
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Using the AdderLink POD Manager
The browser-based AdderLink POD Manager allows you to congure, monitor
and manage all aspects of the installation. The System Overview is the rst page to
be displayed and provides a graphical overview of the installation as sensed by the
transmitter:
System Overview elements
HDMI Inputs
The line appearance and number colors indicate the status of the two HDMI inputs:
Both HDMI inputs
active.
One HDMI input active,
the other inactive.
Both HDMI inputs
inactive.
Remote outputs
The screen and line colors indicate the current status for each remote output. The number
within each screen shows which of the two HDMI inputs is being routed to that screen:
The screen is registered, active
and displaying an output.
Transmitter has lost contact with the
registered receiver (and its screen) -
the output status is unknown, e.g. link
cable disconnected.
There is an issue with the screen and
its registration with the transmitter.
The conditions detected are:
The screen has been administratively
disabled, i.e. placed into standby
mode for power saving purposes.
No receiver is attached.
(signied by short line and no screen).
Note: Status information about the inputs and outputs is also provided by the LED indicators
located next to each connector on the transmitter unit. See AdderLink DV104T features for
details.
The input lines shown
here indicate that HDMI
input 1 is active while
input 2 is inactive.
The green screen and the blue
line leading to it indicate that
remote link 3 is operating
and the screen is correctly
registered with the transmitter.
Use the Rescan System
option to ensure the
displayed details are fully
up to date.
Monitor is not connected
Monitor is not powered
Incorrect i/p selected on monitor*
No active video on i/p to transmitter
* This feature is display screen dependent. It
works by detecting the loading on the HDMI
outputs from the receiver modules. However,
some screens load their HDMI lines even
when they are not displaying the video feed.