User guide

INSTALLATIONCONFIGURATIONOPERATION

FURTHER

INFORMATION

INDEX

Transmitterconguration

Within the AdderLink POD Manager you can access the Transmitter conguration page

in either of two ways:

• Click the TransmitterConguration button, or

• In the System Overview, click the transmitter image.

The conguration page will be displayed:

In this page you can:

• Determine the operation mode and how the various receivers and their screens are

allied with the HDMI input(s),

• Choose which screen congurations (EDID) are used to inform the HDMI source(s),

• Enable and disable all screens (such that they are sent into standby mode when

disabled).

To determine the operating mode

The operating mode, and the related input switching mode, are fundamental to

determining how the AdderLink DV104T links the HDMI inputs through to the remote

screens. For explanations of each mode, please see the section Operating modes.

1 Access the AdderLink POD Manager.

2 On the left side, click the TransmitterConguration button (or click the

transmitter image within the System Overview).

3 Within the main section of the page, choose the required Operating Mode:

• Single source - to use a single HDMI input at a time, or

• Dual source - to use both HDMI inputs

simultaneously. When you change to the Dual

source setting, the other options will change

accordingly

 If you chose Dual source, jump to step 5. However,

if you chose Single source, you now need to

determine the Input switching scheme.

4 For Single source mode, now choose the required Input switching scheme:

• Fixed - to use one HDMI input to feed all four receivers regardless of the status of

that source.

• Auto - to use one HDMI input as an initial source and also provide automatic

switchover from that HDMI input to the other when either the initial source is lost

or the second source becomes active. The transmitter will switch back to the initial

source when either its status changes or the second source is removed.

5 Choose the required Source option(s). The remaining setting(s) on this page will

depend upon the choice you made in step 3 above.

• For Single source - choose the primary source: HDMI 1 or HDMI 2.

• For Dual source - choose the appropriate source for each output: HDMI 1 or

HDMI 2.

6 Click the Save button to apply your changes.

continued