User guide
19
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
In operation, most AdderLink DV installations require no intervention once congured.
The transmitter unit takes care of all connection control behind the scenes and
AdderLink POD Manager provides suitable management tools for remote monitoring.
MANAGING THE INSTALLATION
The AdderLink POD Manager provides a clear and intuitive overview of the installation
that allows you to take swift action if necessary.
To display the System Overview page within AdderLink POD Manager
1 Use a computer that is directly or indirectly (i.e. via a network switch) connected
to the ALDV104T transmitter. If you need to make a temporary connection, see the
section Accessing the AdderLink POD Manager.
2 Run a web browser on your computer and enter the IP address of the ALDV104T
transmitter. The default setting is: 192.168.1.22
The System Overview page of the AdderLink POD Manager should be shown:
Operation
Within the AdderLink POD Manager you can:
• View the real-time overview of the installation. See the section System overview
elements for explanations of the various line and screen colors.
• Ensure that the graphical view of installation is fully updated.
See Rescanning the System Overview.
• React to an input source failure and switch to the alternative input if available.
See the section Changing to an alternative input source.
• Enable and disable all screens (such that they are sent into standby mode when disabled).
See the section Enabling and disabling all screens.
• Make alterations to key transmitter or receiver settings.
• Administer network settings, user accounts and rmware upgrades.
Use the Rescan System
option to ensure the
displayed details are
fully up to date.
For explanations of the various line
and screen colors, please see the
section System overview elements.
HT