User guide

14
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Receiverconguration
Within the AdderLink POD Manager you can access the conguration page for any
receiver in either of two ways:
• Click the ReceiverConguration button and then click the required Port number
entry, or
• In the System Overview, click the appropriate screen image.
The conguration page will be displayed:
The page includes the following:
• An Identify button that will cause the connected receiver to identify itself,
• The name of the attached screen (if present) as derived from the screen’s EDID,
• An Enable / Disable Screen option that allows you to administratively blank out (i.e.
send into standby mode) the attached screen,
• A Screen description eld so that you may add suitably descriptive text, such as the
screen location - particularly useful in large distributed installations.
When you make any change, click the Save button.
If there are any detected issues with the receiver or the
screen, information will be displayed within this page as well
as the System Overview page
Ü
To identify receivers
When multiple receivers are located next to each other it can be difcult to single out
a particular unit. The Identify option within the conguration page for each receiver is
useful for this purpose.
1 Access the AdderLink POD Manager.
2 On the left side, click the ReceiverConguration button.
3 On the left side, click the required port number.
4 Click the Identify button. The orange and green indicators on the chosen receiver will
alternate for six seconds to provide visual identication.