User guide

INSTALLATIONCONFIGURATIONOPERATION

FURTHER

INFORMATION

INDEX

To manage authorized users and their passwords

1 Access the AdderLink POD Manager.

2 On the left side, click the SystemConguration button.

3 Click the User Accounts option. The following page will be displayed:

4 To add or edit a user, select one of the six user

locations and then click the Edit User button

to display the following options

5 Enter/edit the required Username and Password.

• Usernames and passwords can consist of up to sixteen alphanumeric characters.

• Passwords can also include keyboard symbols.

• Usernames and passwords are case sensitive.

6 Click the Save button to apply your changes and return to the previous page.

 Note: If you edit the username and/or password of the account with which you are currently

logged on, when you next attempt to change pages you will be logged off and prompted for

your username and password.

Tocheckandupgradermware

1 Download the latest upgrade le from the Adder Technology website (www.adder.com):

View the Technical Support > Updates section.

2 Access the AdderLink POD Manager.

3 On the left side, click the SystemConguration button.

4 Click the Firmware Upgrade option. The transmitter will scan all ports to

determine the rmware versions of all connected receivers. The results are then

shown within the Upgrade page together with the rmware version of the transmitter:

 By default, only the transmitter option will be ticked. If necessary, change this to

determine which devices should be included within the upgrade process.

5 Click the Continue button. However, if you wish to abort the upgrade process at this

point, click the Reboot button.

6 Click the Upload button to display a le dialog.

7 Use the le dialog to locate the upgrade le that you downloaded earlier and click

OK.

 Note: If you select a le which is not an upgrade le, an upgrade failure message will be

displayed. Click the Reboot button before attempting another upgrade.

 If the le is correct, the upgrade process will commence to all devices that are ticked

within the list. The POD Manager page will indicate that uploading is in progress; also

the orange indicators on the transmitter’s output ports will cease ashing for the

duration.

8 When the upgrade process is complete, click the Reboot button to take the

transmitter and the receivers through a cold restart cycle.