User guide
7
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
MOUNTING
There are three main mounting methods for the transmitter unit:
• The supplied four self-adhesive rubber feet,
• The rear mounting slot,
• Optional rack fascia plate (and rack mount chassis).
Rack fascia plate
The optional fascia plate (plus
screws), allows the transmitter to
be secured within a standard rack
chassis.
Installation
CONNECTIONS
Installation involves linking the ALDV104T transmitter to the host computer; the
(up to) four receivers; a network port and the supplied power adapter.
• HDMI connections
• Network connection
• Receiver connections
• Power adapter connection
Connections may be made in any order however, where possible, connect the
transmitter to the mains supply as a nal step.
Using the rear mounting slot
The slot at the rear of AdderLink DV104T unit allows it to be hung upon a xed screw
that protrudes from the mounting surface.
5mm ( )0.19"
9.5mm 0.37"( )
IMPORTANT: The internal circuit board is accessible through the mounting
slot. Ensure that any mounting screws protrudes no further than ½”
(12.5mm) into the module casing - serious electrical damage will be caused if
the screw makes contact with the internal circuitry.
HT