Technical data

ePowerSwitch 8XM / 8XS
5.3 Configuring the ePowerSwitch 8XM with a browser
Remarks:
In order to be able to access the Web server of the ePowerSwitch 8XM, you must before have configured its
network parameters (ask your network administrator for the parameters to use).
The Web server of the ePowerSwitch 8XM works with Internet Explorer Version 6.0 or higher and with
Netscape Version 6.1 or higher.
1. Start your Web browser.
2. Type the IP address of your ePowerSwitch 8XM following by /sysadmin.htm to access to the
configuration page .
Example: http://192.168.1.180/sysadmin.htm
The browser displays the authentication dialog box.
3. Enter the administrator name and password then click on OK
(default values = admin for name and password).
The configuration page is displayed, allowing you to set all the parameters of the ePowerSwitch 8XM.
There are four main tabs: General, Settings, Misc and Help. Additional tabs will be available after you click one of
the main tabs.
17