Specifications

AdderLink X-Series Installation and Use Page 25
For example, assuming the default hotkeys, press these keys together :
b j f
Functions and options are accessed by pressing a letter key followed by a number
key followed by the RETURN key. For example to run the function that resets the X-
KVM to its factory default settings:
Whilst within configuration mode press F 8
f
The num, caps and scroll lock lights will indicate correct acceptance of the command
as follows:
• In compensation / configuration the num, caps and scroll lock lights will flash in
sequence.
• After pressing the first key of a command sequence the num, caps and scroll
lock lights will all be illuminated.
• After pressing the second key of a command sequence the num and caps lock
lights will be on and the scroll lock light will be off.
• After pressing RETURN the command will have been accepted and the num,
caps and scroll lock lights will go back to flashing in sequence.
When you have finished selecting options, return to normal operation by pressing
f
2.9 Summary of X-KVM functions and options
Full details of each of the configuration options and their uses are given in section 4.
F1 f - Reports the X-KVM’s firmware version. The connected computer
must be running an application that displays typed keys as screen
characters — e.g. a word processor or command prompt.