Datasheet

ManualsBrandsAddi-Data ManualsModulesModule 40-Channel PCI

Multifunction counter board, optically isolated,

encoder, incremental counter, timer/counter, SSI, PWM, ...

APCI-1710

Available functions:

incremental counter, SSI synchronous serial

interface, counter/timer, pulse acquisition,

frequency/pulse width/period duration/velocity

measurement, PWM, digital inputs and outputs, ...

Function selection through software

Optical isolation

TTL, RS422, 24 V

The board APCI-1710 is a fast multifunction and multi-

channel counter board for the PCI bus. The strengths of

this board are its wide range of applications and high

precision and reliability for rough industrial applications.

With this board you can realise many different applica-

tions on the same hardware base. The board is supplied

with a pool of functions which provides the user with

maximum efciency yet minimum space and parts require-

ment. The functions are individually congured for each

channel through the supplied software. The exible

programming facilities on this board allow many different

user applications to be quickly and easily developed and

recongured as further requirements arise. Thanks to the

FPGA board structure, further counting applications can

be realised through software adaptation. Contact us!

Features

32-bit data access•

Up to 5 MHz input frequency•

Signals in TTL or RS422 mode (APCI-1710), •

24 V signals (APCI-1710-24V)

Four onboard function modules

•

Reprogrammable functions•

Functions

Incremental counter for the acquisition of incremental •

encoders (90° phase-shifted signals)

SSI synchronous serial interface. The SSI function is an

•

interface for systems which allow an absolute position

information via serial data transfer.

Counter/timer (82C54)

•

Pulse acquisition•

Frequency measurement•

Pulse width modulation (PWM)•

Period duration measurement•

Velocity measurement•

Digital inputs and outputs•

Edge time measurement (ETM)•

Customised functions•

Available channels for all four function modules

20 channels for digital inputs, optically isolated•

8 channels, programmable either as digital inputs or •

outputs, optically isolated

4 digital power outputs, optically isolated•

Available lines for each function module

8 lines are available for each function module

Versions

RS422/

TTL I/O

24 V

inputs

5 V

inputs

24 V

outputs

5 V

outputs

TTL I/O

APCI-1710 16 12 – 4 – 28

APCI-1710-24V – 28 – 4 – 28

APCI-1710-5V-I 16 – 12 4 – 28

APCI-1710-5V-I-O 16 – 12 4 4 28

Safety features

Creeping distance IEC 61010-1•

Optical isolation 1000 V•

Noise neutralisation of the PC supply•

Applications

Event counting • Position acquisition•

Motion control • Batch counting•

...•

Software drivers

A CD-ROM with the following software and programming

samples is supplied with the board.

Standard drivers for:

Linux•

32-bit drivers for Windows 8 / 7 / Vista / XP / 2000•

Signed 64-bit drivers for Windows 8 / 7 / XP•

Real-time use with Linux and Windows on request•

Drivers and samples for the following compilers and

software packages:

.NET•

Microsoft VC++ • Microsoft C•

Borland C++ • Borland C•

Visual Basic • Delphi•

LabVIEW•

On request:

Further operating systems, compilers and samples.

Driver download: www.addi-data.com/downloads menu

The software functions can be adapted to your applica-

tions on request. The board can also be implemented for

other software applications.

Also for

CompactPCI™

See CPCI-1710, page 246

Also for

CompactPCI™ Serial

See CPCIs-1711, page 234

Also for

see APCIe-1711

page 140

for SSI, incremental

counter, digital I/O

LabVIEW

64/32-bit drivers

on request

Phone: +49 7229 1847-0 info

addi-data.com

Fax: +49 7229 1847-222 www.addi-data.com

178

Summary of content (9 pages)

PAGE 1
Multifunction counter board, optically isolated, encoder, incremental counter, timer/counter, SSI, PWM, ... APCI-1710 Available functions: incremental counter, SSI synchronous serial interface, counter/timer, pulse acquisition, frequency/pulse width/period duration/velocity measurement, PWM, digital inputs and outputs, ...
PAGE 2
PCI, counter – APCI-1710 Wide range of applications through free combination of function modules Simplified block diagram 4 function modules quickly and easily programmable with numerous functions 24 V screw terminal supply Each of the four modules is programmed with one function. You can program 4 times the same function or freely combine 4 different functions.
PAGE 3
PCI, counter – APCI-1710 Function Incremental counter Up to 2 incremental encoders can be connected to a module programmed with the function Incremental counter.
PAGE 4
PCI, counter – APCI-1710 Function Chronos The function Chronos is a timer interface which allows to measure the time between two “events” like a chronometer. 3 functions are available: • a 32-bit timer to create a time reference, • a 32-bit measuring timer to determinate and measure the time between start and stop pulse. • 3 digital inputs and 3 digital outputs and determines the output frequency. The input frequency is set according to the PCI clock pulse or to the 10 MHz onboard clock generator.
PAGE 5
PCI, counter – APCI-1710 Function Counter/Timer Function equivalent to Intel 82C54 Mode 5: Hardware-triggered strobe (retriggerable) The module Counter/Timer can be used as a programmable interval counter/timer (similar to Intel 82C54) with 3 x 32-bit per module. It generates time delays through software control. Instead of setting up timing loops in software, the user programs the module for the desired delays. After this delay, the module will interrupt the PC.
PAGE 6
PCI, counter – APCI-1710 Function TOR The TOR function is a counter interface which allows counting input signals in a defined time interval. 2 TOR counters are available on each function module. Each TOR counter includes 2 x 32-bit timers. The TOR function is a scaled-down version of the Counter/Timer function. The pulse signal of Timer 1 gives the start and stop pulse signal to Timer 0. Timer 0 counts the input signals.
PAGE 7
PCI, counter – APCI-1710 Function Pulse counter The Pulse counter is an interface for the acquisition of external digital pulses. Each rising or falling edge on the counter input starts decrementing from the initially set counter value. An interrupt is generated at logical “0”, i.e. the digital output is set or reset.
PAGE 8
PCI, counter – APCI-1710 Function ETM (Edge Time Measurement) The ETM function is a timer interface which allows measuring the duration of a period, and simultaneously, the “High” or “Low” level time of this period. A function module with the ETM function has • 1 timer to create a time base • 2 counters to measure the period duration • 2 counters to measure the “High” or “Low” level time • 2 gate inputs The ETM function uses 4 inputs (A to D) with each function module of the APCI-1710 or CPCI-1710.
PAGE 9
PCI, counter – APCI-1710 Specifications Counter components Counting depth: 32-bit, Counting frequency: up to 5 MHz Free programming of the functions 32-bit or 16-bit acquisition of incremental encoders Acquisition of absolute encoders/SSI Counter/timer Chronos/TOR for frequency measurement Pulse acquisition Chronos for pulse width modulation Chronos for period duration measurement TOR for velocity measurement Digital I/O, 24 V, TTL, RS422 PWM ETM Customised functions Signals Digital I/O signals, TTL or RS