User Manual

 
 ________________________________________________________________________________________________________________
26
2. Ifmeasurementis active,press  once,otherwisepress twice.
3. PressthenavigationkeysUp/Downtoselecttheseconditemfromthepop‐uplist,andthenpressEnterorDoneto
changethemeasurement.
4. Toimprovemeasurementprecision,youcanshortthevoltsinput,thenpressZerotoclear
themeasuredvalue.
8.2.3 Frequency Measurement
Proceedasfollowstomeasurefrequency:
1. Figure8.3 shows the frequency measurement
connections.
2. If measurement is active, press  once, otherwise
press twice.
3. Press the navigation keys Up/Downto select the third
item from the pop‐up list, then press Enter or Done to
changethemeasurement.

8.2.4 Pulse Counting
Proceedasfollowstocountpulse:
1. Figure8.4showsthepulsecountingconnections.
2. If measurement is active, press  once, otherwise
press twice.
3. Press the navigation keys Up/Downto select the fourth
item from  the pop‐up list, then press Enter orDone to

Figure8.3FrequencyMeasurement