User Manual

 

 ________________________________________________________________________________________________________________

54

1. Enterthecalibra tionpassword:316.

2. Selectanitemfromthecalibrationlist:measurement,sourceandpressuremodule.

3. Connecttoamoreprecise,higher‐standardizedunit,andfinishthecalibrationstepbystep.

4. YoucanrestorethefactorycalibrationdatabypressingRestore

9.7 24V dc Loop Power

Thecalibratorsuppliesaninternalloop

powerat24Vdc.Youcanchooseanitemfromthedropdownlist:ONandOFF.

Note:WhentheSourcemA(internalpowersupply)isinuse,thelooppowercannotbeturnedoff.

9.8 Display Language

Thecalibratorsupportsamultilingualuser‐interface.Youcanchangethedisplaylanguageasfollows:

SelecttheLanguageintheSetuppageandpressEnterorSelect

2. Selectanitemfr om thelanguagelistbox,andpressEnterorDone

9.9 Help Guide

Thehelpguidecanhelpyouquicklymasterthedeviceconnectionsandthetypicalapplicationsofthecalibrator.