Owner's manual

Pressure / Process Calibration EquipmentAdditel Datasheet 2014 / 2015
Corporate Headquarters
22865 Savi Ranch Parkway Ste F
Yorba Linda, CA 92887, USA
Salt Lake City Office
802 Bamberger Dr, Suite C
American Fork, UT 84003, USA
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Accuracy
ADT672-02: 0.025% of full scale
ADT672-05: 0.05% of full scale
>15,000 (1,000 bar): 0.1% FS
Gauge Types
Gauge pressure
Compound Pressure
Absolute pressure
Differential pressure
Display
Description: Dual-line 6 full digit FSTN LCD with LED
Backlight
Display rate: 3.5 readings per second (Default setting)
Numeral display height: 16.5mm (0.65")
Pressure Units
Pa, kPa, MPa, psi, bar, mbar, inH
2
O@4°C,
mmH
2
O@4°C, inHg@0°C, mmHg@0°C, kgf/cm
2
Environmental
Compensated Temperature: 14°F to 122°F (-10°C to
50°C)
Operating Temperature: 14°F to 122°F (-10°C to
50°C)
Storage Temperature: -4°F to 158°F (-20°C to 70°C)
Humidity: <95%
OVERVIEW
Gauge pressure Differential pressure
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 672 series precision
pressure calibrators provide a pressure calibration solution for gauges, transmitters, and switches over a wide
pressure range. The 672 is a very portable device and can measure pressure precisely with a built-in pressure
sensor, as well as read the current or mV produced by a transducer. It can even supply an excitation voltage to
power sensors or transmitters during calibration. In order to reach 0.025% F. S. accuracy up to 10,000 psi (700
bar) and 0.1% F. S. accuracy up to 40,000 psi (2,800 bar), every silicon pressure sensor in our gauges has been
specially aged, tested and screened before assembly. The 672 series precision pressure calibrators are unmatched
in performance and reliability.
FEATURES
Pressure ranges to 40,000 psi (2800 bar)
Measure mA with 0.01% RD + 1.5 μA accuracy
Measure V with 0.01% RD + 1.5 mV accuracy
Power transmitters during test using 24V loop supply
Pressure switch test
HART Communication capability
Advanced temperature compensation
Dual readout
Min/Max/Hold to capture changing measurements
Data logging
Large, easy to read display with 6-digit resolution
Backlit display
Rechargeable battery or AC adapter
NIST traceable calibration with data (Included)
SPECIFICATIONS
Digital Pressure Calibrators
Additel 672
Pressure ranges to 40,000 psi (2,800 bar)
HART Communication capability
Measure mA or V, and with 24V loop power
Easy-to-use, inexpensive pressure calibrator with
uncertainty better than 0.025%FS