User`s guide

Addonics Technologies – Jupiter Combo Hard Drive User’s Guide v1.0 12
Configuration: Jupiter Cipher ExDrive enclosure is inside mobile rack.
Mobile rack is connected to the IDE Controller on the mainboard with an
IDE cable.
FOR 2.5” IDE HARD DISK DRIVE
A. Jupiter ExDrive is set to MASTER
B. Jupiter ExDrive is set to SLAVE
Hard Drive
Brand
J4 Jumper
Setting
Hitachi
NEC
Fujitsu
Toshiba
Seagate
Pin 1~6 Open
Hard Drive
Setting
J1 Jumper
Setting
Master Pin 1 – Pin 3 Short
Pin 2 – Pin 4 Short
Hard Drive
Brand
J4 Jumper
Setting
Hitachi
NEC
Fujitsu
Seagate
Pin 1 – Pin 2 Short
Toshiba Pin 3 – Pin 4 Short
Hard Drive
Setting
J1 Jumper
Setting
Slave Pin 1 – Pin 3 Short
Pin 2 – Pin 4 Short