user manual

Technical Support

If you need any assistance to get your unit functioning properly, please have

your product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

T E C H N O L O G I E S

www.addonics.com

Internal 6G 4-Port SATA

PCIe controller

(AD4SA6GPX2)

User Guide

PAGE 1
T E C H N O L O G I E S User Guide Internal 6G 4-Port SATA PCIe controller (AD4SA6GPX2) www.addonics.com Technical Support If you need any assistance to get your unit functioning properly, please have your product information ready and contact Addonics Technical Support at: Hours: 8:30 am - 6:00 pm PST Phone: 408-453-6212 Email: http://www.addonics.
PAGE 2
Overview 4 SATA Ports Top View HDD LED PIN www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.
PAGE 3
Hardware Installation 1. Power off the computer and install the card in a PCI Express slot that can accept a 2X or larger card. 2. Connect to target devices. NOTE: This host adapter can support up to a total of 7 targets, with the use of one port multiplier. However, it will only recognize up to four drives on a port multiplier and will not recognize any other hardware after finding one.
PAGE 4
Setting Up Hardware RAID This adapter's hardware RAID capabilities may be configured using either the BIOS utility or the Marvell Storage Utility. There is no functional difference, other than the BIOS utility can prepare an array without an operating system (which may then be installed onto the array) and the Marvell Storage Utility has the convenience of a Graphical User Interface. This adapter supports RAID 0 (2, 3 or 4 drives), RAID 1 (2 drives), RAID 10 (4 drives), and “HyperDuo” (hybrid HDD/SDD mode).