User`s guide

Document Number: MAN-0057XX-000 Version 1.0
Set Up a Remote Connection
1. In the Status Window, select Change Connection from the File menu.
2.
Enter the host name or IP address of the host computer on which the daemon is
installed and enter the default port number of 51116.
3.
Click OK.
The user interface establishes the requested connection and displays information
gathered by the remote daemon in the
Status Window.
2
3
Note: The host name or IP address is not saved across sessions.
Install New Firmware
1. Select Specify Firmware from the Edit menu of the Status Window or click the
Specify Firmware toolbar button.
57XX-Series SteelVine Manager User's Guide
Page 78