User guide

View Current Network Configuration
Displays details about the NAS unit's current network settings. Includes device and network names as well as TCP/IP settings.
Configure the Network Settings
Starts the network configuration wizard.
Choosing Automatic will configure the NAS unit as a DHCP client and the configuration wizard will skip to the end. Choosing Manual configuration will
proceed to Step 2.
Step 2 configures the NAS unit's static IP address and subnet mask. To choose a working static IP address, make sure you meet these criteria:
1. The subnet mask must match the rest of the network exactly.
2. The IP address must match the router's IP address exactly where the subnet mask is "255."
3. The IP address cannot end in 0 or 255.
4. The IP address must not match any other system on the network, including the router.
5. The IP address should not be within the DHCP server's client pool.
7 www.addonics.com Technical Support (M-F 8:30 am – 6:00 pm)