User guide

Addonics Technologies – Pocket CDRW Users Guide v 3.0 9
CardBus/PCMCIA Installation for Windows NT
1. Go to Start\Settings\Control Panel
2. Double Click SCSI adapter icon
3. Click on the Driver Tab
4. Click Add to add new driver
5. Follow wizard and browse to A:\NT folder for the Driver.
6. Select “Addonics PCMCIA…” then click ok.
7. Windows will prompt you for driver location again, to continue
Type in A:\NT then click continue.
8. Click YES to restart your computer.
Note: You must insert the CardBus/PCMCIA cable when system is off.
CardBus/PCMCIA Installation for Windows 2000
1. Make sure your computer is up and running
2. Verify that all cables are connected and there is power to the drive.
3. Insert the CardBus/PCMCIA cable to the CardBus/PCMCIA socket.
4. A "New Hardware Found" message shall pops up.
5. Select "Next" to continue installation.
6. Select "Search for a suitable driver...." button and select "Next".
7. In "select a Device Driver page", select "Have Disk" to specify
location. Enter path like A:\win2000" Select "Addonics CardBus…. or
Addonics PCMCIA...." click YES for the Windows warning message
and let Win2000 to finish the Installation and that's it.
8. Double Click on the “My Computer” icon. Your Pocket CDRW
Will appear as a CD drive icon. You are now ready to use the
CDRW drive.