User guide

Addonics Technologies – Pocket CDRW Users Guide v 3.0 12
USB Cable Installation
Attach the USB-IDE cable’s “MC 36 Connector” to your Addonics Pocket
Drive firm and securely – you should not be able to disconnect the cable
without pressing the release notch.
USB driver Installation
For Win98 and Win98SE
Note:
1. 4X will be the Maximum writing speed on
8X CDRW Drive depending on how fast the
system is.
2. No Driver required for ME and 2000
a. Make sure your computer is up and running
b. Verify that all cables are connected and there is power to the
drive.
c. Insert the USB cable to the USB Port.
d. A "New Hardware Found" message shall pops up.
e. Follow the ON SCREEN wizard and point to the location of
A:\USBWIN98 for the driver.
f. Let Windows finish the installation and that’s it.
g. Double click My Computer icon and see if you have an extra
drive letter for the drive.
h. You may now access the drive.
For Power Installation please
refer to Diagram 1 from page5