User guide

Addonics Technologies – Pocket CDRW Users Guide v 3.0 6
For Win98SE, ME and Win2000
(Note for Win98SE only: After plugging in the cable some system might
prompt you for Win98SE CD, in case you don’t have The Win98SE CD and
the wizard prompt you for
a. NTMAP.SYS please type C:\WINDOWS\SYSTEM32\DRIVERS
b. NTMAPHLP.PDR please type C:\WINDOWS\SYSTEM\IOSUBSYS
IF the system did not prompt you for anything just follow the steps below)
1. Make sure the Firewire cable is securely attach from the back of the drive.
2. When External power is attach to the drive make sure that the switch on
the
Back of the drive is set to AC/DC.
3. Power on the system, on the Window Desktop, double click on the
MY COMPUTER icon.
4. Plug the FIREWIRE-IDE cable’s “FIREWIRE Connector” into
Your computer’s FIREWIRE port.
5. Wait for a few seconds, your computer may blink for a moment as well.
6. If all is well you should see a CD-ROM icon under my computer.
8. You may now access your CDRW drive.