User guide

Addonics Technologies – Pocket CDRW Users Guide v 3.0 7
Card Bus/PCMCIA Cable Settings
The Addonics CardBus/PCMCIA card has an option switch can allow you
to choose using either CardBus/PCMCIA mode or CardBus mode. The
switch position is as follows:
Side View
CardBus mode currently supports WIN 95/98/ME/2000 only.
For DOS, WIN 3.1x and WIN NT, the switch must be set in
PCMCIA mode.
Front view
Cardbus and PCMCIA
selection switch.
CardBus mode – move the
switch to the side with the
DOT indicator
PCMCIA
CardBus
Factory default setting
is CardBus mode
For Power Installation please
refer to Diagram 1 from page5