User guide

Addonics Technologies – Pocket CDRW Users Guide v 3.0 8
CardBus/PCMCIA driver Installation
For Windows 95, 98, SE and ME
(Do not run the SETUP program from the driver disk, SETUP
Is for DOS or WIN 3.1 only)
1. Power on your system and wait for the Desktop screen.
2. Connect the CardBus/PCMCIA cable and external AC/DC adapter
into the back of your Pocket CDRW Drive.
3. Plug the CardBus/PCMCIA card end of the cable into the
CardBus/PCMCIA slot on the side of your computer.
4. The system will automatically identify the new card and ask to load
the driver.
5. Insert the driver diskette in “A” drive and follow the instruction on the
screen to load “Addonics Cardbus IDE Controller” or “Addonics
PCMCIA IDE Controller”. All drivers and necessary files are
located in the driver diskette under the sub-directory
WINDOW9x. Be sure to select the A:/window 9x folder
when the system prompts for the location of driver disk.
6. When finished installation, a PCMCIA card icon will appear in the
lower right-hand of the Window’s Task Bar.
7. Double Click on the “My Computer” icon. Your Pocket CDRW will
appear as a CD drive icon. You are now ready to use the Pocket
CDRW drive.