User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
113
10 Q&A – QUESTIONS AND ANSWERS:
Problem: Solution:
There is no picture after changing values in the menu
"DISPALY PROPERTIES -> Settings":
You have to press the following key combination to
get a picture again:
CTRL+ALT+Fx
Fx:
F1 = VGA
F2 or F3 = SVIDEO
F4 = DVI
We recommend to change the settings in the Intel
garphic menu:
"DISPLAY PROPERTIES -> Settings -> Advanced ->
Intel -> device properties"
The computer does start up automatically Please refer to chapter 4.5 Power on (Startup modes)
Strange behaivor of the system during the boot up
the OS or during using the system
Enter the bios setup and set the primary IDE channel
to “user” (instead “auto”). Change the value “Ultra
DMA Mode” = “2”
After changing the hardware to a newer revision or
version with the IHC4, Windows get a blue screen
during the boot up
You have to install the Windows again (New installa-
tion of the OS)
Sound Quality
Note:
To have a better sound quality please configure the
“Sound” as follows:
- enter the menu settings
- enable the “AUX” input in the playback device area
Mute the following inputs: AUX, CD-Player, Phone, Line IN