User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
67
4.19 IrDA- Option
Since BIOS version V1.02, standard- IrDA can be accessed through the connector X7 (pin5/pin6).
The IrDA-Interface is not assembeld on the Standard-Product. It is available as option.
4.19.1 IrDA-BIOS Settings
I/O Device Configuration :
Serial Port B : Auto oder Enabled
Mode : IRDA
Base I/O Adress : 2F8
Interrupt : IRQ 3
4.20 WLAN Option
Internaly connected to the UBS channel 1 !
General Feature
Compliance with IEEE802.11b
Compliance with USB v1.1
Compliance with WECA Wi-Fi
Security
l Support IEEE 802.11 compatible 64 bit WEP
l Support 128 bits128RC4 algorithm
Hardware Specification
Radio
Chip set: Intersil Prism2.5
Base-band processor/MAC chip: ISL3873B
Data rate: 1,2,5.5,11 Mbps
Nominal radiated power: 14dBm (For ETSI/FCC/ARIB)
Receiver sensitivity with data rate FER = 8*10E-2
11Mbps<-82dBm
5.5Mbps<-84dBm
2Mbps<-88dBm
1Mdps<-90dBm
Security system: RC4 WEP 64 /128bit
Operating mode: Ad-hoc, 802.11Ad-hoc and Infrastructure
Adaptor firmware
Protocol and device driver interface identical to Intersil firmware
According to IEEE802.11b regulation, all channels (channel 1~ channel 14) should be allowed
(2.400GHz~2.497GHz)
USA/Canada CH1-CH11 , Europe/Mainland China Ch1-Ch13, Japan Ch1-Ch14
Card standard
Standard: IEEE 802.11(b) Compliant
Regulation
US: FCC PART 15 SUBPART B&C(3M)
Canada: RSS 210
Europe : EN60950(LVD), EN 300 328(EMI), ETS 301 489(EMS)