User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C
7
1 PREFACE
This document is for integrators and programmers of systems based on the MICROSPACE-Computer family.
It contains information on hardware requirements, interconnections, and details of how to program the sys-
tem. The specifications given in this manual were correct at the time of printing; advances mean that some
may have changed in the meantime.
The information contained in this document is, to the best of our knowledge, entirely correct. However,
DIGITAL-LOGIC AG, cannot accept liability for any inaccuracies or the consequences thereof, of for any li-
ability arising from the use or application of any circuit, product decribed herein, as seen fit by DIGITAL-
LOGIC AG without further notice.
1.1 Trademarks
Digtial-Logic , Digital-Logic-Logo, MICROSPACE, smartModule are registered trademarks owned worldwide
by Digital-Logic AG Luterbach (Switzerland). In addition, this document may include names, company logos,
and trademarks which are registered trademarks and are therefore proprietary to their respective owners.
1.2 Disclaimer
DIGITAL-LOGIC AG makes no representations or warranties with respect to the contents of this manual and
specifically disclaims any implied warranty of merchantability or fitness for any particular purpose. DIGITAL-
LOGIC AG shall under no circumstances be liable for incidental or consequential damages or related ex-
penses resulting from the use of this product, even if it has been notified of the possibility of such damage.
DIGITAL-LOGIC AG reserves the right to revise this publication from time to time without obligation to notify
any person of such revisions
1.3 Environmental Protection Statement
This product has been manufactured to satisfy environmental protection requirements where possible. Many
of the components used (structural parts, printed circuit baords, connectors, batteries, etc.) are capable of
being recycled.
Final disposition of this product after its service life must be accomplished in accordance with applicable
country, state, or local laws or regulations.
1.4 Who should use this Product
- Electronic engineers with know-how in PC-technology.
- Without electronic know-how we expect you to have questions. This manual assumes, that you have a
general knowledge of PC-electronics.
- Because of the complexity and the variability of PC-technology, we can’t give any warranty that the prod-
uct will work in any particular situation or combination. Our technical support will help you to may find a
solution.
- Pay attention to the electrostatic discharges. Use a CMOS protected workplace.
- Power supply OFF when you are working on the board or connecting any cables or devices.
1.5 How to use this Manual
This manual is written for the original equipment manufacturer (OEM) who plans to build computer systems
based on the single board MICROSPACE-PC. It provides instructions for installing and configuring the this
board, and describes the system and setup requirements.