User`s manual

DIGITAL-LOGIC AG MPC40/A/B/C, MPC41 Manual V1.4C

1.6 Recycling Information

All components within this products fulfills the requirements of RoHS.

The product is soldered with a lead free process.

1.7 Technical Support

1. Contact your local Digital-Logic Technical Support in your country.

2. Use Internet Support Request form on http://support.digitallogic.ch/ -> embedded products ->New Sup-

port Request

 Support requests will only be accepted with detailed informations about the product (BIOS-, Board- ver-

sion) !

1.8 Limited Two Year Warranty

DIGITAL-LOGIC AG warrants the hardware and software products it manufactures and produces to be free

from defects in materials and workmanship for two year following the date of shipment from DIGITAL-LOGIC

AG, Switzerland. This warranty is limited to the original purchaser of product and is not transferable.

During the two year warranty period, DIGITAL-LOGIC AG will repair or replace, at its discretion, any defec-

tive product or part at no additional charge, provided that the product is returned, shipping prepaid, to

DIGITAL-LOGIC AG. All replaced parts and products become property of DIGITAL-LOGIC AG.

Before returning any product for repair, direct customers from Digital-Logic AG Switzerland are re-

quired to register a RMA number (Return Material Autorisation number) in the Support Center on

http://support.digitallogic.ch/

All other customer have to contact their local distributors for returning defects materials.

This limited warranty does not extend to any product which has been damaged as a result of accident, mis-

use, abuse (such as use of incorrect input voltages, wrong cabling, wrong polarity, improper or insufficient

ventilation, failure to follow the operating instructions that are provided by DIGITAL-LOGIC AG or other con-

tingencies beyond the control of DIGITAL-LOGIC AG), wrong connection, wrong information or as a result of

service or modification by anyone other than DIGITAL-LOGIC AG. Neither, if the user has not enough

knowledge of these technologies or has not consulted the product manual or the technical support of

DIGITAL-LOGIC AG and therefore the product has been damaged.

Except, as expressly set forth above, no other warranties are expressed or implied, including, but not limited

to, any implied warranty of merchantability and fitness for a particular purpose, and DIGITAL-LOGIC AG ex-

pressly disclaims all warranties not stated herein. Under no circumstances will DIGITAL-LOGIC AG be liable

to the purchaser or any user for any damage, including any incidental or consequential damage, expenses,

lost profits, lost savings, or other damages arising out of the use or inability to use the product.